Spiral Flute Tap, Thread Size #10-32, UNF, Overall Length 2 3/4 in, Cobalt, TiAlN, Thread Length 1 1/32 in, 75 Percent Thread Drill Size #21, Thread Limit 2B, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 2-3/4 in |
| Tap Style | Spiral Flute |
| Shank Dia. | 0.194 in |
| Tap Chamfer | Semi-Bottoming |
| Tap Dimension Type | Inch |
| Tap Material | Cobalt |
| Tap Size | #10 |
| Number of Flutes | 3 |
| Thread Length | 35/64 in |
| Pitch Diameter Limit | Not Rated |
| Number of Pieces | 1 |
| Tap Thread Size | #10-32 |
| List Number | PRO-892SF |
| Tap Grouping | Tap |
| Standards | DIN, ASME |
| Tap Finish | TiAlN |
| Tap Thread Type | UNF |
| Thread Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Size | #10 |
| Series | PRO-892SF |
| Measurement System | Pipe |
| Tap Shank Standard | ANSI, DIN |
| Helix Angle | 38 deg |
| Spiral Direction | Right Hand |
| Tap Length Standard | DIN |
| Drill Bit Size | #21 |
| 65% Thread Drill Size | 4.15 mm |
| Thread Limit | 2B |
| 75% Thread Drill Size | #21 |
| Thread Size | #10-32 |
| Threads per Inch | 32 |
| Shank Type - Machining | Straight |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Hardened Steel, Stainless Steel, Steel |
| Extended Neck | Yes |
| Class of Fit | 2 B |
| 55% Thread Drill Size | 4.25 mm |
| Square Size | 0.152 in |
| Shank Length | 1-23/32 in |
| Thread Standard | UNF |
| Primary Material Application ISO Code | P, M, N, H |
| Square Width | 0.152 in |
| Shank Type | Square |
| Impact Rated | Not Impact Rated |
| Secondary Material Application ISO Code | Not Applicable |
| Secondary Material Application | Not Applicable |
| Square Length | 0.152 in |
| Tap Application | Blind Hole |
| Shank Diameter | 3/16 in |
| Wire Rope Length | 2-3/4 in |
| Length | 2-3/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |