Spiral Flute Tap, Thread Size M16x1.5, Metric, Overall Length 110 mm, Cobalt, Black Oxide, Thread Length 53 mm, 75 Percent Thread Drill Size 14.50mm, Thread Limit 6H, Class of Fit 6H, Thread Direction Right Hand, Number of Flutes 4
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 110 mm |
| Number of Flutes | 4 |
| Tap Material | Cobalt |
| Shank Dia. | 9.68 mm |
| Tap Style | Spiral Flute |
| Tap Chamfer | Semi-Bottoming |
| Tap Size | M16 |
| Tap Dimension Type | Metric |
| Pitch Diameter Limit | Not Rated |
| Tap Finish | Black Oxide |
| List Number | PER-893SF |
| Standards | DIN, ASME |
| Tap Grouping | Tap |
| Tap Thread Type | Metric Fine |
| Number of Pieces | 1 |
| Thread Direction | Right Hand |
| Thread Length | 20 mm |
| Tap Thread Size | M16-1.50 |
| Cutting Direction - Machining | Right Hand |
| Size | M16 |
| Series | PER-893SF |
| Drill Bit Size | 14.5 mm |
| Tap Shank Standard | DIN, ASME |
| 75% Thread Drill Size | 14.50mm |
| Extended Neck | Yes |
| Measurement System | Metric |
| Thread Standard | Metric |
| Spiral Direction | Right Hand |
| Shank Length | 57 mm |
| Thread Size | M16x1.5 |
| Thread Pitch | 1.5 mm |
| 65% Thread Drill Size | 14.7 mm |
| Square Size | 9.14 mm |
| Secondary Material Application ISO Code | Not Applicable |
| Thread Limit | 6H |
| Shank Type - Machining | Straight |
| 55% Thread Drill Size | 14.9 mm |
| Helix Angle | 38 deg |
| Tap Length Standard | DIN |
| Secondary Material Application | Not Applicable |
| Class of Fit | 6H |
| Square Length | 9.14 mm |
| Square Width | 9.14 mm |
| Shank Diameter | 12.19 mm |
| Tap Application | Blind Hole |
| Primary Material Application | Stainless Steel, Steel |
| Shank Type | Square |
| Primary Material Application ISO Code | P, M |
| Impact Rated | Not Impact Rated |
| Wire Rope Length | 110 mm |
| Length | 110 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |