Spiral Flute Tap, Thread Size 9/16 In.-18, UNF, Overall Length 4 21/64 in, Cobalt, Hard Lube, Thread Length 1 49/64 in, 75 Percent Thread Drill Size 12.90mm, Thread Limit 2B, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 4
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 4-21/64 in |
| Number of Flutes | 4 |
| Tap Material | Cobalt |
| Shank Dia. | 0.429 in |
| Tap Style | Spiral Flute |
| Tap Chamfer | Semi-Bottoming |
| Tap Size | 9/16" |
| Tap Dimension Type | Inch |
| Tap Finish | Hard Lube |
| List Number | PER-980SF |
| Tap Grouping | Tap |
| Tap Thread Size | 9/16"-18 |
| Number of Pieces | 1 |
| Tap Thread Type | UNF |
| Standards | DIN, ASME |
| Pitch Diameter Limit | Not Rated |
| Thread Direction | Right Hand |
| Thread Length | 1-1/64 in |
| Cutting Direction - Machining | Right Hand |
| Series | PER-980SF |
| Size | 9/16 |
| 75% Thread Drill Size | 12.90mm |
| Helix Angle | 38 deg |
| Class of Fit | 2 B |
| Thread Size | 9/16"-18 |
| Measurement System | Fractional Inch |
| Shank Type - Machining | Straight |
| Primary Material Application | Stainless Steel, Steel |
| Drill Bit Size | 33/64 in |
| Shank Length | 2-17/32 in |
| Spiral Direction | Right Hand |
| Thread Standard | UNF |
| 55% Thread Drill Size | 13.25 mm |
| Threads per Inch | 18 |
| Primary Material Application ISO Code | P, M |
| Material Grade - Machining | PER-980SF |
| 65% Thread Drill Size | 33/64 in |
| Extended Neck | No |
| Tap Length Standard | DIN |
| Thread Limit | 2B |
| Tap Shank Standard | DIN, ASME |
| Square Size | 0.322 in |
| Square Length | 0.322 in |
| Shank Diameter | 27/64 in |
| Secondary Material Application ISO Code | Not Applicable |
| Square Width | 0.322 in |
| Tap Application | Blind Hole |
| Secondary Material Application | Not Applicable |
| Impact Rated | Not Impact Rated |
| Shank Type | Square |
| Wire Rope Length | 4-21/64 in |
| Length | 4-21/64 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |