Spiral Point Tap, Thread Size 3/8 In.-16, UNC, Overall Length 3 15/16 in, Cobalt, TiAlN, Right Hand, Thread Length 1 47/64 in, 75 Percent Thread Drill Size 0.3125 in, Thread Limit 2B, Class of Fit 2B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.381 in |
| Tap Material | Cobalt |
| Tap Style | Spiral Point |
| Tap Size | 3/8" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 3-15/16 in |
| Number of Flutes | 3 |
| Thread Length | 25/32 in |
| List Number | PRO-861SP |
| Pitch Diameter Limit | Not Rated |
| Tap Thread Size | 3/8"-16 |
| Tap Grouping | Tap |
| Standards | ANSI, DIN |
| Number of Pieces | 1 |
| Tap Thread Type | UNC |
| Thread Direction | Right Hand |
| Tap Finish | TiAlN |
| Cutting Direction - Machining | Right Hand |
| Size | 3/8 |
| Series | PRO-861SP |
| Drill Bit Size | 5/16 in |
| Tap Length Standard | DIN |
| Spiral Direction | Neutral |
| Measurement System | Fractional Inch |
| Secondary Material Application ISO Code | Not Applicable |
| 65% Thread Drill Size | P |
| Primary Material Application ISO Code | P, M, N, H |
| 55% Thread Drill Size | 8.4 mm |
| 75% Thread Drill Size | 5/16 in |
| Thread Limit | 2B |
| Square Size | 0.286 in |
| Thread Standard | UNC |
| Secondary Material Application | Not Applicable |
| Shank Length | 2-3/16 in |
| Extended Neck | Yes |
| Tap Shank Standard | ANSI |
| Shank Type - Machining | Straight |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Hardened Steel, Stainless Steel, Steel |
| Class of Fit | 2B |
| Threads per Inch | 16 |
| Thread Size | 3/8"-16 |
| Helix Angle | 0 deg |
| Shank Diameter | 3/8 in |
| Impact Rated | Not Impact Rated |
| Square Length | 0.286 in |
| Tap Application | Through Hole |
| Square Width | 0.286 in |
| Shank Type | Square |
| Wire Rope Length | 3-15/16 in |
| Length | 3-15/16 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |