Square End Mill, 2 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 5.18 mm, Overall Length 40 mm, Shank Dia. 3 mm, Neck Dia. Not Applicable
| Number of Flutes | 4 |
|---|---|
| Length of Cut | 5.18 mm |
| Single End/Double End | Single |
| End Mill Cutting Type | Center Cutting |
| Shank Dia. | 3 mm |
| Overall Length | 40 mm |
| Cutting Direction | Right Hand |
| Corner Radius | 0 in |
| Helix Angle | 30 deg |
| Neck Length | Not Applicable |
| End Mill Style | Square |
| Pitch | Not Applicable |
| Milling Dia. | 2 mm |
| List Number | CEM-SE-4M-AT |
| Chamfer Width | 0 in |
| Item | Square End Mill |
| Neck Dia. | Not Applicable |
| End Mill Application | Profile, Ramping |
| Series | Not Applicable |
| Spiral Direction | Right Hand |
| Measurement System | Metric |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application ISO Code | P, K |
| Secondary Material Application ISO Code | N |
| Secondary Material Application | Aluminum |
| Flute Type | Spiral |
| Material Grade - Machining | General Purpose |
| Shank Type - Machining | Straight |
| Max. Helix Angle | 30 deg |
| For Material Hardness | 38 HRC |
| Drilling Tool Configuration | Individual |
| Finish - Machining | AlTiN |
| Material - Machining | Carbide |
| Coolant Fed | Non-Coolant Through |
| Min. Helix Angle | Not Applicable |
| Number of Coolant Holes | 0 |
| Chip-Breaker | No |
| Material Applications | Cast Iron, Nickel, Inconel, Alloy Steel, Carbon Steel, Alloy Steel, Carbon Steel, Stainless Steel, Steel, Alloy Steel, Carbon Steel, Prehardened Steel |
| Flute Spacing | Fixed |
| Wire Rope Length | 40 mm |
| Length | 40 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |