Thread Forming Tap, Thread Size 1/4 In.-20, UNC, Overall Length 2.5 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 0.63 in, 75 Percent Thread Drill Size 5.70 mm, Thread Limit H6, Class of Fit 2B
| Item | Thread Forming Tap |
|---|---|
| Tap Thread Size | 1/4"-20 |
| Tap Chamfer | Bottoming |
| Tap Finish | Bright |
| Number of Flutes | 0 |
| Number of Pieces | 1 |
| Thread Direction | Right Hand |
| Pitch Diameter Limit | H6 |
| Tap Dimension Type | Inch |
| Thread Length | 1 in |
| List Number | 1092 |
| Overall Length | 2-1/2 in |
| Tap Thread Type | UNC |
| Tap Style | Thread Forming |
| Standards | USCTI |
| Tap Material | High Speed Steel |
| Shank Dia. | 0.367 in |
| Tap Size | 1/4" |
| Cutting Direction - Machining | Right Hand |
| Extended Neck | Yes |
| 75% Thread Drill Size | 5.7 mm |
| Thread Limit | H6 |
| 55% Thread Drill Size | 5.85 mm |
| Thread Size | 1/4"-20 |
| Shank Length | 1-1/2 in |
| Primary Material Application | Brass, Bronze, Copper, Aluminum, Stainless Steel, Steel |
| Square Size | 0.191 in |
| Threads per Inch | 20 |
| Material Grade - Machining | 1092 |
| Series | 1092 |
| Thread Standard | UNC |
| Spiral Direction | Neutral |
| 65% Thread Drill Size | #1 |
| Primary Material Application ISO Code | P, N, M |
| Class of Fit | 2 B |
| Helix Angle | 0 Degrees |
| Tap Application | Blind Hole |
| Secondary Material Application | Not Applicable |
| Secondary Material Application ISO Code | Not Applicable |
| Shank Type | Square |
| Square Width | 0.63 in |
| Shank Diameter | 0.255 in |
| Square Length | 5/8 in |
| Wire Rope Length | 2-1/2 in |
| Length | 2-1/2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |