AC Gearmotor, Number of Output Shafts 1, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Nonventilated, Nameplate Speed 181 RPM, Maximum Torque 12 in-lb, Overhung Load Capacity 50 lb, Rotation CW/CCW, Output Shaft Height 1.19 in, Mounting Orientation Any Angle, Operating Voltage 115/230V AC, Inverter Rated No, Gear Ratio 10:1, Brake Type None, Shaft Orientation Parallel, Includes Capacitor Capacitor Included, Motor Insulation Class B
| Item | AC Gearmotor |
|---|---|
| Gearmotor Voltage | 230V AC, 115V AC |
| Gearmotor Phase | 1 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 12 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 181 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 5-3/4 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 0.62/0.33 A |
| Keyway Size Type | Flat |
| Standards | C-UL Recognized, CE Certified, UL Recognized |
| Input HP | 1/20 hp |
| Finish | Unpainted |
| Max. Ambient Temp. | 40 deg C |
| Rotation | CW, CCW |
| RPM @ 50 Hz | 154 |
| RPM Range | 151 to 200 |
| Phase | Single |
| Shaft Dia. (Dimension U) | 5/16 in |
| Insulation Class | B |
| Lubrication | Grease Filled |
| Housing | Die Cast Zinc |
| Shaft Orientation | Parallel |
| Capacitor Required | Yes |
| Motor Type | Permanent Split Capacitor |
| Seals | O-ring Type on Output Shaft |
| Keyway Size | Flat |
| Overhung Load | 50 lb |
| Gear Material | Acetyl, Steel |
| Dimension A | 5-3/4 in |
| Gear Ratio | 10:1 |
| Enclosure | TENV |
| Gear Case Material | Die Cast Zinc |
| Gears | Acetyl/Steel |
| Hz | 50/60 Hz |
| Voltage | 230V, 115V |
| Shaft Length (Dimension V) | 3/4 in |
| Reversible Shaft Output | No |
| Thermal Protection | None |
| Shaft | Single Output |
| Bearings | Ball on Motor, Porous Bronze Sleeve on Case |
| Mounting | All Position |
| Overall Width | 5-1/4 in |
| Overall Height | 3.94 in |
| Housing Material | Die Cast Zinc |
| Mount Type | Any Position |
| Housing Material Finish | Unpainted |
| Frequency | 50 Hz, 60 Hz |
| Bearing Type | Ball on Motor, Porous Bronze Sleeve on Case |
| Inverter Rated | No |
| Brake Type | None |
| Mounting Orientation | Any Angle |
| Maximum Torque | 12 in-lb |
| Full Load Current | 0.62/0.33 A |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Output Shaft Diameter | 5/16 in |
| Motor Insulation Class | B |
| Nameplate Speed | 181 RPM |
| Operating Voltage | 115/230V AC |
| Number of Output Shafts | 1 |
| Maximum Ambient Temperature | 104 deg F |
| Input Horsepower | 0.05 HP |
| Overhung Load Capacity | 50 lb |
| Keyway Type | Flat |
| Seal Type | O-Ring Type |
| Output Shaft Length | 3/4 in |
| Output Shaft Height | 1.19 in |
| Inverter Rating | 10:1 |
| Includes Capacitor | Yes |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |