AC Gearmotor, Number of Output Shafts 1, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Nonventilated, Nameplate Speed 105 RPM, Maximum Torque 20 in-lb, Overhung Load Capacity 50 lb, Rotation CW/CCW, Output Shaft Height 2.07 in, Mounting Orientation Any Angle, Operating Voltage 115V AC, Inverter Rated No, Gear Ratio 15.9:1, Brake Type None, Shaft Orientation Parallel, Motor Insulation Class B, Compatible Capacitor Manufacturer Part Number 2MDV4
| Item | AC Gearmotor |
|---|---|
| Gearmotor Voltage | 115V AC |
| Gearmotor Phase | 1 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 20 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 105 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 6.33 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 0.53 A |
| Keyway Size Type | Flat |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/25 hp |
| Application | Agriculture, Conveyors, Food and Beverage Equipment, Industrial Machinery, Packaging |
| Housing | Die Cast Aluminum |
| Bearings | Ball on Motor, Sleeve on Case |
| Shaft Length (Dimension V) | 1.05 in |
| Gear Material | Nylon, Sintered Steel |
| Insulation Class | B |
| Gear Case Material | Die Cast Aluminum |
| Service Factor | 1 |
| Number of Brake Discs Required | 1 |
| Gear Ratio | 15.9:1 |
| Motor Shaft Design | Flat |
| Finish | Powder Coated |
| Shaft Dia. (Dimension U) | 1/2 in |
| Reversible Shaft Output | Yes |
| Capacitor Required | Yes |
| Keyway Size | Flat |
| Max. Ambient Temp. | 40 deg C |
| Seals | Spring Loaded |
| No Load RPM | 104 RPM |
| Overall Length | 6.99 in |
| Gears | 1st Stage Helical, Subsequent Stages Spur |
| Hz | 50/60 Hz |
| Lubrication | Grease |
| Motor Type | Permanent Split Capacitor |
| Thermal Protection | None |
| Overhung Load | 50 lb |
| Gear Type | Helical (1st Stage), Spur (Subsequent Stages) |
| Starting Torque | 22 in-lb |
| RPM @ 50 Hz | 88 RPM |
| Rotation | CW, CCW |
| Phase | Single |
| Shaft Orientation | Parallel |
| Housing Material | Die Cast Aluminum |
| Full Load Current | 0.53 A |
| Overall Height | 3-1/2 in |
| Keyway Type | Flat |
| Seal Type | Spring Loaded Type |
| Inverter Rating | 15.91:1 |
| Frequency | 50 Hz, 60 Hz |
| Output Shaft Diameter | 1/2 in |
| Compatible Capacitor Manufacturer Part Number | 2MDV4 |
| Input Horsepower | 0.55 HP |
| Nameplate Speed | 105 RPM |
| Overall Width | 3.36 in |
| Overhung Load Capacity | 50 lb |
| Keyway Depth | 1/8 in |
| Operating Voltage | 115V AC |
| Bearing Type | Ball on Motor, Sleeve on Case |
| Keyway Width | 3/16 in |
| Inverter Rated | No |
| Mount Hole Center-to-Center Length | 2.64 in |
| Output Shaft Length | 1-1/16 in |
| Maximum Torque | 20 in-lb |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Housing Material Finish | Powder Coated |
| Maximum Ambient Temperature | 104 deg F |
| Mount Hole Center-to-Center Width | 2.64 in |
| Brake Type | None |
| Mounting Orientation | Any Angle |
| Output Shaft Height | 2.07 in |
| Mount Type | Any Position |
| No Load Speed | 104 RPM |
| Motor Insulation Class | B |
| Number of Output Shafts | 1 |
| Wire Rope Length | 6.99 in |
| Length | 6.99 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |