AC Gearmotor, Number of Output Shafts 1, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 30 RPM, Maximum Torque 360 in-lb, Overhung Load Capacity 400 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Operating Voltage 115/230V AC, Inverter Rated No, Gear Ratio 54:1, Brake Type None, Shaft Orientation Parallel, Includes Capacitor Capacitor Included, Motor Insulation Class B
| Item | AC Gearmotor |
|---|---|
| Gearmotor Voltage | 230V AC, 115V AC |
| Gearmotor Phase | 1 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 360 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 30 RPM |
| Gearmotor Enclosure | Totally Enclosed Fan-Cooled |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 10 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 2.05/1.05 A |
| Keyway Size Type | 0.18 sq in x 1 in |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/5 hp |
| RPM @ 50 Hz | 26 |
| Gear Ratio | 54:1 |
| Bearings | Ball and Needle on Case, Ball on Motor |
| Lubrication | Grease Filled |
| Voltage | 230V, 115V |
| Reversible Shaft Output | No |
| Phase | Single |
| Insulation Class | B |
| Shaft Dia. (Dimension U) | 3/4 in |
| Seals | Lip Type on Input and Output Shaft |
| Gears | 1st Stage Helical, Hardened Steel, Subsequent Stages Spur |
| RPM Range | 16 to 30 |
| Brake | Adaptable to 5X400 |
| Hz | 50/60 Hz |
| Number of Brake Discs Required | 2 |
| Keyway Size | 0.18" Square x 1" |
| Gear Material | Hardened Steel |
| Gear Case Material | Die Cast Aluminum |
| Max. Ambient Temp. | 40 deg C |
| Thermal Protection | None |
| Finish | Unpainted |
| Mounting | All Position |
| Enclosure | TEFC |
| Shaft Orientation | Parallel |
| Shaft Length (Dimension V) | 1.38 in |
| Motor Type | Permanent Split Capacitor |
| Shaft | Single Output |
| Overhung Load | 400 lb |
| Rotation | CW, CCW |
| Housing | Die Cast Aluminum |
| Gear Type | Helical (1st Stage), Spur (Subsequent Stages) |
| Capacitor Required | Yes |
| Overall Width | 5.63 in |
| Overall Height | 4.88 in |
| Housing Material | Die Cast Aluminum |
| Motor Insulation Class | B |
| Operating Voltage | 115/230V AC |
| Frequency | 50 Hz, 60 Hz |
| Motor Enclosure | Totally Enclosed Fan-Cooled |
| Seal Type | Lip Type on Input and Output Shaft |
| Output Shaft Diameter | 3/4 in |
| Maximum Torque | 360 in-lb |
| Mounting Orientation | Any Angle |
| Number of Output Shafts | 1 |
| Keyway Depth | 1 in |
| Maximum Ambient Temperature | 104 deg F |
| Input Horsepower | 0.2 HP |
| Keyway Type | 0.18 sq in x 1 in |
| Keyway Width | 3/16 in |
| Inverter Rated | No |
| Nameplate Speed | 30 RPM |
| Bearing Type | Ball and Needle on Case, Ball on Motor |
| Mount Hole Center-to-Center Width | 3.63 in |
| Housing Material Finish | Unpainted |
| Inverter Rating | 54:1 |
| Full Load Current | 2.05/1.05 A |
| Brake Type | None |
| Overhung Load Capacity | 400 lb |
| Output Shaft Length | 1-3/8 in |
| Mount Type | Any Position |
| Includes Capacitor | Yes |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |