AC Gearmotor, Number of Output Shafts 1, Motor Type Split-Phase, Motor Enclosure Open Air-Over, Nameplate Speed 45 RPM, Maximum Torque 438 in-lb, Overhung Load Capacity 385 lb, Rotation CW/CCW, Output Shaft Height 4.63 in, Mounting Orientation Horizontal, Operating Voltage 115V AC, Gear Ratio 38:1, Brake Type None, Shaft Orientation Parallel, Motor Insulation Class F, Application Conveyors, Feeders, Mixers, Pumps..
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Item | AC Gearmotor |
| Gearmotor Voltage | 115V AC |
| Gearmotor Phase | 1 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 438 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 45 RPM |
| Gearmotor Enclosure | Open Fan Cooled |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 12-1/2 in |
| Gearmotor Mounting Position | Horizontal |
| Full Load Amps | 5.9 A |
| Keyway Size Type | 1/4 sq in x 1-3/8 in |
| Standards | UL Recognized |
| Input HP | 1/3 hp |
| Rotation | CW, CCW |
| Overall Length | 14.27 in |
| RPM Range | 31 to 50 |
| Mounting | Horizontal |
| Seals | Oil Seals on Output Shaft |
| Housing | Cast Iron |
| Lubrication | 90, ISO 220 Grade Gear Oil, SAE, Type 5ep |
| Thermal Protection | None |
| Dimension H | 0.41 in |
| Max. Ambient Temp. | 40 deg C |
| Insulation Class | F |
| Shaft | Single Output |
| Overhung Load | 385 lb |
| Dimension N | 1/4 in x 1-3/8 in |
| Keyway Size | 1/4" Square x 1-3/8" |
| Gears | Steel |
| Dimension A | 7.13 in |
| Voltage | 115V |
| Gear Material | Steel |
| Dimension C | 14.27 in |
| Dimension S | 4-3/8 in |
| Dimension Z | 4-3/4 in |
| Gear Ratio | 38:1 |
| Hz | 60 |
| Motor Type | Split-Phase |
| Shaft Length (Dimension V) | 2-1/4 in |
| Height (Dimension O) | 6.83 in |
| Dimension E | 3-1/8 in |
| Dimension U | 1" |
| Enclosure | OFC |
| Application | Conveyors, Feeders, Mixers, Pumps |
| Phase | Single |
| Bearings | Ball on Case and Motor |
| Shaft Dia. (Dimension U) | 1 in |
| Gear Case Material | Cast Iron |
| Shaft Orientation | Parallel |
| Gear Type | Steel |
| Capacitor Required | Yes |
| Housing Material | Cast Iron |
| Input Horsepower | 0.33 HP |
| Output Shaft Height | 4.63 in |
| Mounting Orientation | Horizontal |
| Motor Insulation Class | F |
| Maximum Ambient Temperature | 104 deg F |
| Seal Type | Oil Seals, Type on Output Shaft |
| Mount Type | Horizontal |
| Keyway Width | 1/4 in |
| Housing Mount Hole Size | 0.56 in |
| Maximum Torque | 438 in-lb |
| Operating Voltage | 115V AC |
| Keyway Depth | 1-3/8 in |
| Full Load Current | 5.9 A |
| Output Shaft Length | 2-1/4 in |
| Motor Enclosure | Open Air-Over |
| Bearing Type | Ball on Case and Motor |
| Brake Type | None |
| Output Shaft Diameter | 1 in |
| Keyway Type | Woodruff |
| Mount Hole Center-to-Center Length | 7-3/4 in |
| Nameplate Speed | 45 RPM |
| Number of Output Shafts | 1 |
| Mount Hole Center-to-Center Width | 6-1/4 in |
| Frequency | 60 Hz |
| Overhung Load Capacity | 385 lb |
| Overall Height | 6.83 in |
| Overall Width | 7.13 in |
| Wire Rope Length | 14.27 in |
| Length | 14.27 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |