AC Gearmotor, Number of Output Shafts 1, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 58 RPM, Maximum Torque 490 in-lb, Overhung Load Capacity 600 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Operating Voltage 115/230V AC, Inverter Rated No, Gear Ratio 28:1, Brake Type None, Shaft Orientation Parallel, Includes Capacitor Capacitor Included, AGMA Gear Class Class 9
| Item | AC Gearmotor |
|---|---|
| Gearmotor Voltage | 230V AC, 115V AC |
| Gearmotor Phase | 1 |
| Gearmotor Type | AC Gearmotor |
| Max. Torque | 490 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 58 RPM |
| Gearmotor Enclosure | Totally Enclosed Fan-Cooled |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Brake Type | None |
| Length Less Shaft | 16 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 5.2/2.8 |
| Standards | CSA Certified, UL Recognized |
| Input HP | 1/2 hp |
| Capacitor Required | Yes |
| Dimension A | 5.2/2.8 in |
| Housing | Die Cast Aluminum |
| Dimension D1 | 5.61 in |
| Gear Case Material | Die Cast Aluminum |
| Enclosure | TEFC |
| Dimension D2 | 6.76 in |
| Shaft Length (Dimension V) | 1.88 in |
| Motor Type | Permanent Split Capacitor |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Shaft Dia. (Dimension U) | 3/4 in |
| Lubrication | Permanent Gear Oil |
| Gear Ratio | 28:1 |
| Overhung Load | 600 lb |
| RPM Range | 51 to 75 |
| Thermal Protection | None |
| Dimension L | 15.1 in |
| Hz | 50/60 Hz |
| Gear Material | Hardened Steel |
| Max. Ambient Temp. | 40 deg C |
| Mounting | All Position |
| Bearings | Ball on Motor, Needle Throughout with Thrust Balls on Case |
| Shaft Orientation | Parallel |
| Gears | 1st Stage Helical, AGMA Class 9, Hardened Steel, Subsequent Stages Spur |
| Voltage | 230V, 115V |
| Rotation | CW, CCW |
| Gear Type | Helical (1st Stage), Spur (Subsequent Stages) |
| Phase | Single |
| Overall Width | 4.78 in |
| Overall Height | 6-1/4 in |
| Housing Material | Die Cast Aluminum |
| Output Shaft Length | 1-7/8 in |
| Input Horsepower | 0.5 HP |
| Inverter Rating | 28:1 |
| Frequency | 50 Hz, 60 Hz |
| Nameplate Speed | 58 RPM |
| Seal Type | Spring Loaded Lip Type on Input and Output Shaft |
| Full Load Current | 5.2/2.8 A |
| Brake Type | None |
| Inverter Rated | No |
| Overhung Load Capacity | 600 lb |
| Maximum Torque | 490 in-lb |
| Keyway Width | 1/8 in |
| Motor Enclosure | Totally Enclosed Fan-Cooled |
| Maximum Ambient Temperature | 104 deg F |
| Bearing Type | Ball on Motor, Needle Throughout with Thrust Balls on Case |
| Output Shaft Diameter | 3/4 in |
| Mount Type | Any Position |
| Operating Voltage | 115/230V AC |
| Mounting Orientation | Any Angle |
| Number of Output Shafts | 1 |
| Mount Hole Center-to-Center Width | 3.63 in |
| Keyway Depth | 3/16 in |
| AGMA Gear Class | Class 9 |
| Includes Capacitor | Yes |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |