Fan and Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/5 hp, 3/4 hp HP, Nameplate RPM 1,075 RPM, No. of Speeds 4, Voltage 115V AC, 8.7-2.4 A Full Load Amps, 48YZ Frame, 60 Hz Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Duty Cycle Continuous, Max. Ambient Temp. 60 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air Over, Motor Mounting Type Hole, Stud, Motor Mounting Position All Angle, Shaft Length 5 in, Lead Length 36 in
| Motor Enclosure Design | Open Air-Over |
|---|---|
| Hz | 60 |
| Application | Blowers, Fans and Air Circulators |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Motor Shaft Rotation | CCW, CW |
| Nominal Efficiency | 58% |
| Motor Design | Permanent Split Capacitor |
| No. of Speeds | 4 |
| HP | 3/4 to 1/5 |
| Standards | CSA Certified (244617), UL Recognized (E37403) |
| Capacitor Required | Capacitor Not Included |
| Motor Sub Application | Direct Drive |
| Item | Fan and Blower Motor |
| Full Load Amps | 8.7-2.4 A |
| Motor Mounting Position | All Angle |
| Frame | 48YZ |
| Motor Shaft Design | Flat |
| Shaft Dia. | 1/2 in |
| Length Less Shaft | 5-7/8 in |
| Nameplate RPM | 1,075 |
| Voltage Compatibility | 115V AC, 208V AC to 230V AC, 115V AC, 230V AC, 115V AC, 120V AC, 240V AC, 120V AC |
| Max. Ambient Temp. | 60 deg C |
| Shaft Length | 5 in |
| Motor Thermal Protection | Auto |
| Body Dia. | 5-5/8 in |
| Bolt Circle Dia. | 5-1/8 in |
| Voltage | 115V AC |
| Resilient Ring Dia. | 2-3/16 in |
| RPM Range | 1,001-1,100 |
| Motor Application | HVAC, R |
| Motor Bearings | Ball |
| Ring to Ring Center | 5-3/16 in |
| Motor Mounting Type | Ring/Stud |
| Overall Length | 10-7/8 in |
| Motor Service Factor | 1 |
| Duty | Continuous |
| Phase | Single |
| Ins. Class | B |
| Duty Cycle | Continuous |
| Stud Quantity | 4 |
| Lead Length | 36 in |
| Mounting | Stud |
| Number of Speeds | 5 |
| Drive Type | Direct Drive |
| Insulation Class | B |
| Full Load Current @ 60 Hz | 8.7-2.4 A |
| Bolt Circle Diameter | 5-1/8 in |
| Nameplate Service Factor @ 60 Hz | 1 |
| Product Type | Blower Motor, Fan |
| Bearing Type | Ball |
| Frequency | 60 Hz |
| Stack Size | Not Applicable |
| Shaft Design | Flat |
| Sub Application | General Purpose |
| Frame Size | 48YZ |
| Resilient Ring Diameter | 2-3/16 in |
| Body Diameter | 5.6 in |
| Shaft Diameter | 1/2 in |
| Mounting Position | All Angle |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Ambient Temperature - Maximum | 60 deg C |
| Motor Enclosure Type | Open Air Over |
| Wire Rope Length | 10-7/8 in |
| Length | 10-7/8 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |