Booster Pump, Phase Three, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1 1/2 hp, Nameplate Voltage 230/460V AC, Flow Rate @ 10 psi 15.5 gpm, Flow Rate @ 20 psi 15.3 gpm, Flow Rate @ 30 psi 14.8 gpm, Flow Rate @ 40 psi 14.3 gpm, Flow Rate @ 50 psi 13.8 gpm, Flow Rate @ 60 psi 13.3 gpm, Flow Rate @ 70 psi 12.8 gpm, Flow Rate @ 80 psi 12.2 gpm, Flow Rate @ 90 psi 11.2 gpm, Flow Rate @ 100 psi 10.2 gpm, Flow Rate @ 120 psi 9.6 gpm, Shut Off Pressure (Maximum) 194 psi
| Booster Pump Type | Multi-Stage Booster Pump |
|---|---|
| Item | Booster Pump |
| HP - Pumps | 1 1/2 hp |
| Voltage - Pumps | 208V AC to 230V AC, 460V AC |
| Phase - Pumps | 3 |
| Inlet Size - Pumps | 3/4 in NPT |
| Outlet Size - Pumps | 3/4 in NPT |
| Number of Stages - Pumps | 13 |
| Max. Pressure - Pumps | 194 psi |
| Housing Material - Pumps | Cast Iron |
| Motor Enclosure - Pumps | Open Dripproof |
| Max. Case Pressure | 300 psi |
| GPM @ 100 PSI | 10.2 |
| GPM @ 80 PSI | 12.2 |
| Max. Liquid Temp. | 140 deg F |
| Phase | Three |
| Hz | 60 Hz |
| Motor Enclosure | Open Dripproof |
| Seal Material | Buna-N/Carbon/Ceramic/Stainless Steel |
| Wetted Materials | Cast Iron, Stainless Steel, Buna N, Noryl, Nylon, Polycarbonate, Carbon-Ceramic |
| GPM @ 40 PSI | 14.3 |
| GPM @ 20 PSI | 15.3 |
| Frame | 56J |
| Agency Compliance | c UL us |
| Length | 27.13 in |
| Suction Lift | 10 ft |
| Inlet | 3/4 in |
| Housing Material | Cast iron |
| Duty | Continuous |
| Motor Ambient Temp. Rating | 65 Degrees C |
| Includes | Manual |
| Amps | 5.7-5.4/2.7 A |
| GPM @ 140 PSI | 8.3 |
| Voltage | 460V, 208V to 230V |
| Stages | 13 |
| GPM @ 10 PSI | 15.5 |
| GPM @ 120 PSI | 9.6 |
| Impeller Type | Closed |
| GPM @ 60 PSI | 13.3 |
| Max. Pressure | 194 psi |
| HP | 1-1/2 |
| Height | 8-3/4 in |
| Impeller Material | Noryl |
| Motor Type | 3-Phase |
| Manufacturers Warranty Length | 1 yr |
| Width | 6-3/4 in |
| Outlet | 3/4" NPT |
| Pump Mounting Position | Horizontal or Vertical with Inlet Down |
| Bearing Type | Ball |
| Overall Height | 8-3/4 in |
| Standards | cULus Listed |
| Overall Length | 27.13 in |
| Application | Pressure Boosting, Pressure Cleaning, Spray or Mist Systems, Reverse Osmosis, Water Circulation |
| Overall Width | 6-3/4 in |
| Maximum Media Temperature | 140 deg F |
| Flow Rate @ 30 psi | 14.8 gpm |
| Flow Rate @ 20 psi | 15.3 gpm |
| Flow Rate @ 80 psi | 12.2 gpm |
| Case Pressure (Maximum) | 300 psi |
| Nameplate Voltage | 230/460V AC |
| Flow Rate @ 70 psi | 12.8 gpm |
| Priming | Self-Priming |
| Flow Rate @ 90 psi | 11.2 gpm |
| Intake Type | NPT |
| Flow Rate @ 50 psi | 13.8 gpm |
| Horsepower | 1.5 |
| Motor Ambient Temperature (Minimum) | 65 deg F |
| Frequency | 60 Hz |
| Shut Off Pressure (Maximum) | 194 psi |
| Flow Rate @ 180 psi | 2.3 gpm |
| Duty Cycle | Continuous |
| Flow Rate @ 140 psi | 8.3 gpm |
| Motor Frame Designation | 56J |
| Flow Rate @ 120 psi | 9.6 gpm |
| Compatible with Media Type | Water |
| Maximum RPM | 3,450 rpm |
| Number of Stages | 13 |
| Flow Rate @ 60 psi | 13.3 gpm |
| Mounting Orientation | Horizontal |
| Discharge Type | NPT |
| Suction Lift (Maximum) | 10 ft |
| Flow Rate @ 40 psi | 14.3 gpm |
| Flow Rate @ 10 psi | 15.5 gpm |
| Impeller Design | Closed |
| Intake Size | 3/4 in |
| Motor Ambient Temperature (Maximum) | 149 deg F |
| Compatible Discharge Pipe Size | 3/4 in |
| Manufacturer Warranty Length | 1 yr |
| Flow Rate @ 100 psi | 10.2 gpm |
| Flow Rate @ 160 psi | 5.3 gpm |
| Wetted Material | Ceramic, Cast Iron, Carbon, Stainless Steel, Noryl, Buna N, Nylon, Polycarbonate |
| For Use With Potable Systems | No |
| Pumping Application | Filtration |
| Compatible Intake Pipe Size | 3/4 in |
| Pump Housing Material | Cast Iron |
| Inlet Diameter | 3/4 in |
| Discharge Standard | NPT |
| Motor Design | Three-Phase |
| Suction Lift - Maximum | 10 ft |
| Media Temperature - Maximum | 140 deg F |
| Motor Ambient Temperature - Minimum | 65 deg F |
| Motor Ambient Temperature - Maximum | 149 deg F |
| Inlet Standard | NPT |
| Full Load Current | 5.7-5.4/2.7 A |
| Case Pressure - Maximum | 300 psi |
| Pump Casing Material | Cast Iron |
| Revolutions Per Minute - Maximum | 3,450 rpm |
| Motor Enclosure Design | Open Drip Proof |
| Shut Off Pressure - Maximum | 194 psi |
| Discharge Diameter | 3/4 in |
| Feet of Head - Maximum | 448 ft |
| Flow Rate - Maximum | 16 gpm |
| Wire Rope Length | 27.13 in |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |