Centrifugal Pump, Phase Three, Pump Housing Material Stainless Steel, Horsepower 1 1/2 hp, Nameplate Voltage 208-230/460V AC, Flow Rate @ 40 ft of Head (Maximum) 60 gpm, Flow Rate @ 60 ft of Head (Maximum) 13 gpm, Flow Rate @ 80 ft of Head (Maximum) Not Applicable, Motor Enclosure Totally Enclosed Fan Cooled, Flow Rate @ 5 ft of Head (Maximum) 102 gpm, Flow Rate @ 10 ft of Head (Maximum) 100 gpm, Flow Rate @ 15 ft of Head (Maximum) 98 gpm, Flow Rate @ 20 ft of Head (Maximum) 95 gpm
| Item | Centrifugal Pump |
|---|---|
| HP | 1 1/2 hp |
| Housing Material | 316 Stainless Steel |
| Phase | Three |
| Voltage | 460V, 208V to 230V |
| Max. GPM @ Head | 116 gpm @ 5 ft |
| Max. Head | 65 ft |
| Inlet | 1-1/2 in NPT |
| Best Efficiency GPM @ Head | 50 gpm @ 48 ft |
| Outlet | 1-1/4 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Manufacturers Warranty Length | 1 yr |
| Height | 7-7/8 in |
| Max. Dia. Solids | 1/8 in |
| GPM of Water @ 10 Ft. of Head | 108 |
| Min. GPM @ Head | 13 gpm @ 60 ft |
| GPM of Water @ 20 Ft. of Head | 100 |
| Port Rotation | 90 Degrees Increments |
| Application | Chemical Processing, Circulating, Cooling, Liquid Transfer, Pressure Boosting, Recirculation |
| Bearing Type | Ball |
| Width | 9-1/4 in |
| Drain Plug | No |
| Max. Case Pressure | 150 psi |
| Duty | Continuous |
| GPM of Water @ 15 Ft. of Head | 105 |
| Hz | 60 Hz |
| Impeller Type | Closed |
| GPM of Water @ 5 Ft. of Head | 116 |
| Motor RPM | 3,450 rpm |
| Best Efficiency Range GPM @ Head | 97 to 16 gpm @ 23 to 60 ft |
| GPM of Water @ 60 Ft. of Head | 13 |
| Amps | 7.0-6.6/3.3 |
| Wetted Materials | 316 Stainless Steel, Carbon, Ceramic, Viton |
| GPM of Water @ 50 Ft. of Head | 44 |
| Inlet Pressure | 122 psi |
| Agency Compliance | CUS |
| Service Factor | 1.15 |
| NEMA/IEC Frame | 56J |
| Max. Liquid Temp. | 300 deg F |
| Impeller Material | 316 Stainless Steel |
| GPM of Water @ 40 Ft. of Head | 70 |
| GPM of Water @ 30 Ft. of Head | 81 |
| Length | 13-7/16 in |
| Includes | Manual |
| Max. Fluid Viscosity | 260 SUS |
| Shaft Material | Stainless Steel |
| Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
| GPM of Water @ 25 Ft. of Head | 95 |
| Seal Type | Mechanical |
| Max. Specific Gravity | 1 |
| Screw Material | Stainless Steel |
| Volute Material | Stainless Steel |
| Motor Type | Three-Phase Induction |
| Overall Length | 13.4 in |
| Overall Width | 9.2 in |
| Standards | CUS |
| Overall Height | 7.8 in |
| Shut Off Pressure (Maximum) | 150 psi |
| Best Efficiency Head | 48 ft |
| Compatible Motor Frame | 56J NEMA |
| Feet of Head (Maximum) | 78 ft |
| Flow Rate (Minimum) | 13 gpm |
| Cord Length | Not Applicable |
| Discharge Rotation | 90 Degrees Increments |
| Flow Rate @ 30 ft of Head (Maximum) | 76 gpm |
| Intake Pipe Size | 1-1/2 in |
| Flow Rate (Maximum) | 116 gpm |
| Intake Pipe Type | NPT |
| Current | 3.6 or 1.8 A |
| Flow Rate @ 60 ft of Head (Maximum) | 13 gpm |
| Discharge Pipe Size | 1-1/4 in |
| Ambient Temperature (Minimum) | 40 Degrees F |
| For Use With Potable Systems | No |
| Nameplate Voltage | 208-230/460V AC |
| Flow Rate @ 10 ft of Head (Maximum) | 100 gpm |
| Solid Diameter (Maximum) | 0.13 in |
| Ambient Temperature (Maximum) | 104 deg F |
| Flow Rate @ 5 ft of Head (Maximum) | 102 gpm |
| Flow Rate @ 20 ft of Head (Maximum) | 95 gpm |
| Best Efficiency Flow | 50 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | 98 gpm |
| Wetted Material | Carbon, Ceramic, Viton, Stainless Steel |
| Flow Rate @ 1 ft of Head (Maximum) | 103 gpm |
| Viscosity (Maximum) | 260 SUS |
| Specific Gravity (Maximum) | 1 |
| Discharge Pipe Type | NPT |
| Shaft Outer Diameter | 7/16 in |
| Horsepower (Maximum) | 1.5 HP |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Media Temperature (Minimum) | 40 Degrees F |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Motor Speed (Maximum) | 3,450 rpm |
| Flow Rate @ 25 ft of Head (Maximum) | 85 gpm |
| Priming | Manual |
| Case Pressure (Maximum) | 150 psi |
| Flow Rate @ 40 ft of Head (Maximum) | 60 gpm |
| Frequency | 60 Hz |
| Duty Cycle | Continuous |
| Impeller Design | Closed |
| Electrical Connection Type | Not Applicable |
| Media Temperature (Maximum) | 300 deg F |
| Feet of Head (Minimum) | 0 ft |
| Thermal Overload Protection | No |
| Pump Design | End Suction |
| Discharge Rotation Increments | 90 deg |
| Discharge Diameter | 1-1/4 in |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Shaft Seal Material | Ceramic, FKM, Carbon, Stainless Steel |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Motor Design | Three-Phase |
| Hazardous Location Class | Not Rated |
| Ambient Temperature - Maximum | 104 deg F |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Horsepower | 1.5 |
| Discharge Orientation | Side |
| Manufacturer Warranty Length | 1 yr |
| Motor Frame Size | 56J |
| Drive Coupling Type | No Coupling |
| Media Temperature - Minimum | 40 Degrees F |
| Shaft Seal Type | Mechanical |
| Series | Not Applicable |
| Inlet Position | Center |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Impeller Diameter | 4-7/16 in |
| Chemical Compatibility | Non-Abrasive Liquids, Non-Flammable Liquids |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Mounting Orientation | Horizontal |
| Ambient Temperature - Minimum | 40 Degrees F |
| Case Pressure - Maximum | 150 psi |
| Discharge Position | Offset |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Full Load Current | 3.6/1.8A |
| Number of Stages | 1 |
| Media Temperature - Maximum | 300 deg F |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Temperature Code | Not Applicable |
| Inlet Orientation | Side |
| Flow Rate @ 10 ft of Head - Maximum | 100 gpm |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| NPSHr | 4.27 ft |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Pump Housing Material | Stainless Steel |
| Suction Lift - Maximum | Not Applicable |
| Motor Speed - Maximum | 3,450 rpm |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Inlet Diameter | 1-1/2 in |
| Shut Off Pressure - Maximum | 150 psi |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |