Centrifugal Pump, Phase Three, Pump Housing Material Stainless Steel, Horsepower 2 hp, Nameplate Voltage 208-230/460V AC, Flow Rate @ 40 ft of Head (Maximum) 75 gpm, Flow Rate @ 60 ft of Head (Maximum) 24 gpm, Flow Rate @ 80 ft of Head (Maximum) Not Applicable, Motor Enclosure Totally Enclosed Fan Cooled, Flow Rate @ 5 ft of Head (Maximum) 117 gpm, Flow Rate @ 10 ft of Head (Maximum) 114 gpm, Flow Rate @ 15 ft of Head (Maximum) 106 gpm, Flow Rate @ 20 ft of Head (Maximum) 109 gpm
| Promotion Restriction | Not eligible for promotion |
|---|---|
| HP | 2 hp |
| Item | Centrifugal Pump |
| Housing Material | 316 Stainless Steel |
| Phase | Three |
| Voltage | 460V, 208V to 230V |
| Max. GPM @ Head | 130 gpm @ 5 ft |
| Max. Head | 68 ft |
| Inlet | 2 in NPT |
| Best Efficiency GPM @ Head | 55 gpm @ 50 ft |
| Outlet | 1-1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Seal Type | Mechanical |
| GPM of Water @ 5 Ft. of Head | 130 |
| Max. Case Pressure | 150 psi |
| GPM of Water @ 25 Ft. of Head | 102 |
| Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
| Motor RPM | 3,450 rpm |
| Port Rotation | 90 Degrees Increments |
| Max. Liquid Temp. | 300 deg F |
| Screw Material | Stainless Steel |
| Max. Fluid Viscosity | 260 SUS |
| Wetted Materials | 316 Stainless Steel, Carbon, Ceramic, Viton |
| GPM of Water @ 50 Ft. of Head | 55 |
| Service Factor | 1.15 |
| GPM of Water @ 15 Ft. of Head | 110 |
| Includes | Manual |
| Width | 10-1/2 in |
| Manufacturers Warranty Length | 1 yr |
| GPM of Water @ 60 Ft. of Head | 24 |
| Impeller Material | 316 Stainless Steel |
| Max. Dia. Solids | 1/8 in |
| GPM of Water @ 30 Ft. of Head | 92 |
| Length | 14-1/2 in |
| Bearing Type | Ball |
| Application | Chemical Processing, Circulating, Cooling, Liquid Transfer, Pressure Boosting, Recirculation |
| GPM of Water @ 40 Ft. of Head | 85 |
| Agency Compliance | CUS |
| Impeller Type | Closed |
| Max. Specific Gravity | 1 |
| Height | 7-3/4 in |
| Shaft Material | Stainless Steel |
| Best Efficiency Range GPM @ Head | 100 to 26 gpm @ 26 to 60 ft |
| GPM of Water @ 10 Ft. of Head | 114 |
| Inlet Pressure | 121 psi |
| GPM of Water @ 20 Ft. of Head | 109 |
| Hz | 60 Hz |
| Drain Plug | No |
| Amps | 9.6-9.2/4.6 |
| Duty | Continuous |
| NEMA/IEC Frame | 56J |
| Min. GPM @ Head | 24 gpm @ 60 ft |
| Motor Type | Three-Phase Induction |
| Volute Material | Stainless Steel |
| Standards | CUS |
| Overall Height | 7.7 in |
| Overall Length | 14-1/2 in |
| Overall Width | 10-1/2 in |
| Flow Rate @ 20 ft of Head (Maximum) | 109 gpm |
| Flow Rate @ 10 ft of Head (Maximum) | 114 gpm |
| Flow Rate @ 1 ft of Head (Maximum) | 118 gpm |
| Specific Gravity (Maximum) | 1 |
| Nameplate Voltage | 208-230/460V AC |
| Electrical Connection Type | Not Applicable |
| Best Efficiency Head | 50 ft |
| Flow Rate @ 40 ft of Head (Maximum) | 75 gpm |
| Cord Length | Not Applicable |
| Motor Speed (Maximum) | 3,450 rpm |
| Solid Diameter (Maximum) | 0.13 in |
| Impeller Design | Closed |
| Horsepower (Maximum) | 2 HP |
| Flow Rate (Minimum) | 24 gpm |
| Intake Pipe Size | 2 in |
| Frequency | 60 Hz |
| Feet of Head (Maximum) | 68 ft |
| Flow Rate @ 5 ft of Head (Maximum) | 117 gpm |
| Compatible Motor Frame | 56J NEMA |
| Discharge Pipe Type | NPT |
| Ambient Temperature (Maximum) | 104 deg F |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Duty Cycle | Continuous |
| Viscosity (Maximum) | 260 SUS |
| Shaft Outer Diameter | 7/16 in |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Discharge Rotation | 90 Degrees Increments |
| Case Pressure (Maximum) | 150 psi |
| Media Temperature (Maximum) | 300 deg F |
| Flow Rate @ 60 ft of Head (Maximum) | 24 gpm |
| Intake Pipe Type | NPT |
| Flow Rate @ 15 ft of Head (Maximum) | 106 gpm |
| Wetted Material | Carbon, Ceramic, Viton, Stainless Steel |
| For Use With Potable Systems | No |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 30 ft of Head (Maximum) | 92 gpm |
| Flow Rate (Maximum) | 130 gpm |
| Current | 4.0 or 2.0 A |
| Flow Rate @ 25 ft of Head (Maximum) | 100 gpm |
| Best Efficiency Flow | 55 gpm |
| Shut Off Pressure (Maximum) | 150 psi |
| Media Temperature (Minimum) | 40 Degrees F |
| Priming | Manual |
| Discharge Pipe Size | 1-1/2 in |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Full Load Current | 4.0/2.0A |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Pump Housing Material | Stainless Steel |
| Number of Stages | 1 |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Motor Design | Three-Phase |
| Flow Rate @ 10 ft of Head - Maximum | 114 gpm |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Discharge Position | Offset |
| Impeller Diameter | 4-7/16 in |
| Suction Lift - Maximum | Not Applicable |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Ambient Temperature - Maximum | 104 deg F |
| Drive Coupling Type | No Coupling |
| Feet of Head (Minimum) | 0 ft |
| Media Temperature - Minimum | 40 Degrees F |
| Series | Not Applicable |
| Horsepower | 2 |
| Inlet Position | Center |
| Motor Frame Size | 56J |
| Manufacturer Warranty Length | 1 yr |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Discharge Diameter | 1-1/2 in |
| Mounting Orientation | Horizontal |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Temperature Code | Not Applicable |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Inlet Diameter | 2 in |
| Ambient Temperature - Minimum | 40 Degrees F |
| Inlet Orientation | Side |
| Motor Speed - Maximum | 3,450 rpm |
| Pump Design | End Suction |
| Shaft Seal Material | Ceramic, FKM, Carbon, Stainless Steel |
| Media Temperature - Maximum | 300 deg F |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Hazardous Location Class | Not Rated |
| NPSHr | 4.86 ft |
| Chemical Compatibility | Non-Abrasive Liquids, Non-Flammable Liquids |
| Discharge Rotation Increments | 90 deg |
| Discharge Orientation | Side |
| Shaft Seal Type | Mechanical |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Shut Off Pressure - Maximum | 150 psi |
| Case Pressure - Maximum | 150 psi |
| Thermal Overload Protection | No |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Wire Rope Length | 14-1/2 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |