Centrifugal Pump, Pump Housing Material Plastic, Horsepower 1/50 hp, Nameplate Voltage 230V AC, Flow Rate @ 1 ft of Head (Maximum) 255 gph, Flow Rate @ 5 ft of Head (Maximum) 195 gph, Flow Rate @ 10 ft of Head (Maximum) 125 gph, Maximum Feet of Head 11 ft, Compatible Intake Pipe Size Not Applicable, Compatible Discharge Pipe Size 1/4 in, Intake Type Screened, Discharge Type NPT, Cord Length 6 ft, Motor Sealing Epoxy Encapsulated, Amps 0.64 A, Compatible with Media Type Oil, Duty Cycle Continuous
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Item | Centrifugal Pump |
| HP | 1/125 hp |
| Voltage | 230V |
| Full Load Amps | 0.64 |
| Cord Length | 6 ft |
| Impeller Material | POM |
| Duty | Continuous |
| Seal Material | Viton |
| GPH of Water @ 10 Ft. of Head | 125 |
| Outlet | 1/4 in NPT |
| GPH of Water @ 5 Ft. of Head | 195 |
| Height | 4-27/32 in |
| Housing Material | Acetal |
| Length | 4-1/2 in |
| Overload Protection | Thermal |
| Width | 2-5/8 in |
| Agency Compliance | UL, CSA |
| Hz | 50/60 Hz |
| GPH of Water @ 1 Ft. of Head | 255 |
| Inlet Type | Screened |
| Electrical Connection - Pumps | Wire Leads |
| Inlet | Screened |
| Electrical Connection (Pumps) | Wire Leads |
| Amps | 0.64 |
| Features | Thermoplastic Motor Housing Handles Water with a Higher Mineral Content |
| Intake Type | Screened |
| Feet of Head (Minimum) | 1 ft |
| Flow Rate @ 10 ft of Head (Maximum) | 125 gph |
| Pumping Application | Condensate Removal, Decorative Water, Evaporative Cooling, Coolant Recirculating, Vaporizers |
| Compatible Intake Pipe Size | Not Applicable |
| Flow Rate @ 1 ft of Head (Maximum) | 255 gph |
| Overall Length | 4-1/2 in |
| Maximum Flow Rate | 255 gph |
| Maximum RPM | 3,400 rpm |
| Flow Rate @ 5 ft of Head (Maximum) | 195 gph |
| Nameplate Voltage | 230V AC |
| Frequency | 60 Hz |
| Motor Sealing | Epoxy Encapsulated |
| Compatible Discharge Pipe Size | 1/4 in |
| Pump Housing Material | Plastic |
| Duty Cycle | Continuous |
| Thermal Overload Protection | Yes |
| Discharge Type | NPT |
| Electrical Connection Type | Hardwired |
| Overall Height | 4.8 in |
| Overall Width | 2.6 in |
| Standards | cCSAus Certified |
| Horsepower | 1/50 hp |
| Maximum Feet of Head | 11 ft |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Compatible with Media Type | Oil |
| Discharge Diameter | 1/4 in |
| Motor Design | Not Applicable |
| Series | Not Applicable |
| Inlet Gender | Not Applicable |
| Includes | Not Applicable |
| Number of Stages | 1 |
| Media Temperature - Maximum | Not Applicable |
| Shut Off Pressure - Maximum | Not Applicable |
| Ambient Temperature - Minimum | Not Applicable |
| Chemical Compatibility | Oil |
| Shaft Seal Type | Not Applicable |
| Shaft Seal Material | FKM |
| Ambient Temperature - Maximum | Not Applicable |
| Feet of Head (Maximum) | 11 ft |
| Inlet Diameter | 1/4 in |
| Manufacturer Warranty Length | 1 yr |
| Phase | Single |
| Suction Lift (Maximum) | Not Applicable |
| Wetted Material | Not Applicable |
| Inlet Standard | Screened |
| Priming | Not Applicable |
| Flow Rate (Minimum) | Not Applicable |
| Flow Rate (Maximum) | 255 gph |
| Media Temperature - Minimum | Not Applicable |
| Full Load Current | 0.64 A |
| Drive Coupling Type | No Coupling |
| Wire Rope Length | 4-1/2 in |
| Fits Chest Size | Thermoplastic Motor Housing Handles Water with a Higher Mineral Content |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |