Centrifugal Pump, Phase Single, Pump Housing Material Aluminum, Horsepower 3/4 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 40 ft of Head (Maximum) 9 gpm, Maximum Feet of Head 42 ft, Compatible Intake Pipe Size 1 1/2 in, Intake Type NPT, Compatible Discharge Pipe Size 1 1/2 in, Discharge Type NPT, Motor Enclosure Open Dripproof, Maximum Flow Rate 62 gpm, Flow Rate @ 5 ft of Head (Maximum) 60 gpm, Flow Rate @ 10 ft of Head (Maximum) 55 gpm, Flow Rate @ 15 ft of Head (Maximum) 51 gpm
| Item | Centrifugal Pump |
|---|---|
| Item - Self Priming Pumps | Self Priming Centrifugal Pump |
| Inlet | 1-1/2 in NPT |
| HP - Pumps | 0.75 HP |
| Outlet | 1-1/2 in NPT |
| Voltage - Pumps | 115V AC, 230V AC |
| HP | 3/4 |
| Phase - Pumps | 1 |
| Wetted Materials | 304 Stainless Steel, Aluminum, Carbon, Ceramic, Viton |
| Max. Head - Pumps | 42 ft |
| Voltage | 230V, 115V |
| Volute Material | Not Applicable |
| Best Efficiency Range GPM @ Head | 29 to 45 gpm @ 30 to 20 ft |
| Seal Material | Viton |
| Outlet Size - Pumps | 1-1/2 in NPT |
| Max. Dia. Solids - Pumps | 3/8 in |
| Suction Lift | 25 ft |
| Motor RPM | 3,450 RPM |
| Motor Enclosure - Pumps | Open Dripproof |
| Max. Pressure - Pumps | 18 psi |
| Housing Material - Pumps | Aluminum |
| Inlet Size - Pumps | 1-1/2 in NPT |
| Max. Temp - Pumps | 180 deg F |
| Max. Dia. Solids | 3/8" |
| GPM of Water @ 40 Ft. of Head | 9 |
| Self-Priming | Yes |
| Height | 10 in |
| Amps | 9.0/4.5 |
| Agency Compliance | c CSA us |
| Max. Pressure | 18.2 psi |
| Port Rotation | 4 Position Increments |
| GPM of Water @ 5 Ft. of Head | 60 |
| Length | 17 in |
| Suction Lift - Pumps | 25 ft |
| Inlet Pressure | 66.8 psi |
| Frame | 56J |
| Impeller Type | Semi Open |
| GPM @ 15 PSI | 19.8 |
| GPM @ 10 PSI | 41 |
| Phase | Single |
| Manufacturers Warranty Length | 1 yr |
| Max. Case Pressure | 85 psi |
| GPM of Water @ 15 Ft. of Head | 51 |
| Width | 7-5/16 in |
| Max. Liquid Temp. | 180 deg F |
| Motor Enclosure | Open Drip Proof |
| Housing Material | Aluminum |
| Motor Type | PSC |
| Duty | Continuous |
| Port Rotation - Pumps | 4 Position Increments |
| Bearing Type | Not Applicable |
| Motor Design | Capacitor-Start, Run |
| Impeller Material | Aluminum |
| Hz | 60 Hz |
| Max. Head | 42 ft |
| GPM of Water @ 10 Ft. of Head | 55 |
| Duty - Pumps | Continuous |
| GPM of Water @ 20 Ft. of Head | 46 |
| GPM of Water @ 30 Ft. of Head | 29 |
| Max. Specific Gravity | 1 |
| Standards | cCSAus Certified |
| Overall Height | 9.9 in |
| Overall Length | 17 in |
| Overall Width | 7.3 in |
| Seal Type | Mechanical |
| Shaft Material | Steel |
| Horsepower | 0.75 |
| Compatible with Media Type | Non-Flammable Liquids, Non-Abrasive Liquids |
| Duty Cycle | Continuous |
| Discharge Type | NPT |
| Flow Rate @ 40 ft of Head (Maximum) | 9 gpm |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 5 ft of Head (Maximum) | 60 gpm |
| Best Efficiency Flow | 62 gpm |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Minimum Flow Rate | 9 gpm |
| Shut Off Pressure (Maximum) | 18.2 psi |
| Best Efficiency Head | 30 ft |
| Specific Gravity (Maximum) | 1 |
| Nameplate Voltage | 115/230V AC |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Maximum RPM | 3,450 rpm |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Motor Frame Designation | 56J |
| For Use With Potable Systems | No |
| Solid Diameter (Maximum) | 0.38 in |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Wetted Material | Ceramic, Carbon, Viton, Stainless Steel, Aluminum |
| Flow Rate @ 20 ft of Head (Maximum) | 46 gpm |
| Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 15 ft of Head (Maximum) | 51 gpm |
| Compatible Discharge Pipe Size | 1-1/2 in |
| Flow Rate @ 10 ft of Head (Maximum) | 55 gpm |
| Intake Type | NPT |
| Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Suction Lift (Maximum) | 25 ft |
| Feet of Head (Minimum) | 2 ft |
| Frequency | 60 Hz |
| Pump Housing Material | Aluminum |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Minimum Media Temperature | 40 deg F |
| Maximum Flow Rate | 62 gpm |
| Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 30 ft of Head (Maximum) | 29 gpm |
| Impeller Design | Semi-Open |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Discharge Rotation | 90 Degrees Increments |
| Compatible Intake Pipe Size | 1-1/2 in |
| Maximum Feet of Head | 42 ft |
| Hazardous Location Class | Not Rated |
| Ambient Temperature - Minimum | Not Applicable |
| Series | Not Applicable |
| Discharge Position | Not Applicable |
| Flow Rate (Maximum) | 62 gpm |
| Number of Stages | 1 |
| Shaft Outer Diameter | Not Applicable |
| Full Load Current | Not Applicable |
| Discharge Orientation | Top |
| Electrical Connection Type | Not Applicable |
| Chemical Compatibility | Non-Abrasive Liquids, Non-Flammable Liquids |
| Flow Rate @ 25 ft of Head (Maximum) | Not Applicable |
| Features | Not Applicable |
| Motor Frame Size | 56J |
| Includes | Not Applicable |
| Temperature Code | Not Applicable |
| Flow Rate @ 10 ft of Head - Maximum | 55 gpm |
| Flow Rate (Minimum) | 9 gpm |
| Inlet Diameter | 1-1/2 in |
| Shut Off Pressure - Maximum | 18.2 psi |
| Feet of Head (Maximum) | 42 ft |
| Pumping Application | Not Applicable |
| Service Factor | Not Applicable |
| Shaft Seal Type | Mechanical |
| Thermal Overload Protection | Not Applicable |
| Inlet Position | Not Applicable |
| Cord Length | Not Applicable |
| Impeller Diameter | Not Applicable |
| Discharge Rotation Increments | Not Applicable |
| Ambient Temperature - Maximum | Not Applicable |
| Media Temperature - Minimum | 40 deg F |
| Mounting Orientation | Not Applicable |
| NPSHr | Not Applicable |
| Discharge Diameter | 1-1/2 in |
| Pump Design | Not Applicable |
| Shaft Seal Material | FKM |
| Manufacturer Warranty Length | Not Applicable |
| Case Pressure - Maximum | Not Applicable |
| Suction Lift - Maximum | 25 ft |
| Media Temperature - Maximum | 180 deg F |
| Inlet Orientation | Not Applicable |
| Motor Speed - Maximum | 3,450 rpm |
| Viscosity (Maximum) | 31 SUS |
| Drive Coupling Type | Not Applicable |
| Priming | Self-Priming |
| Wire Rope Length | 17 in |
| Fits Chest Size | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |