Definite Purpose HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/4 hp HP, Nameplate RPM 1,075 RPM, No. of Speeds 1, Voltage 115V AC, Full Load Amps 2.75 A, Non-Standard Frame, Replacement For Dayton 1BLJ3C, Usable @ 208V Not Usable at 208V, Usable @ 200V Not Usable at 200V, 60 Hz Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CWSE
| Frame | Non-Standard |
|---|---|
| HP | 1/4 hp |
| Item | Corrosion Resistant Direct Drive Motor |
| Motor Application | OEM Replacement |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Totally Enclosed Air-Over |
| Motor Mounting Type | Stud |
| Motor Shaft Rotation | Clockwise Shaft End |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Thermal Protection | Auto |
| Nameplate RPM | 1075 rpm |
| No. of Speeds | 1 |
| OEM Replacement Brand | Dayton |
| Phase | Single |
| RPM Range | 1001-1100 |
| Shaft Dia. | 17 mm |
| Shaft Length | 2-3/4 in |
| Voltage | 115V AC |
| Motor Bearings | Ball |
| Replacement For | Dayton 1BLJ3C |
| Ins. Class | B |
| Max. Ambient Temp. | 40 deg C |
| Length Less Shaft | 7 in |
| Bolt Circle Dia. | 1-31/32 in |
| Full Load Amps | 2.75A |
| Body Dia. | 5-9/16 in |
| Capacitor Required | Included |
| Manufacturers Warranty Length | 1 yr |
| Overall Length | 9-3/4 in |
| Standards | UL |
| Hz | 60 Hz |
| Motor Service Factor | 1 |
| Application | Exhaust Fans |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Voltage Compatibility | 115V AC, 120V AC, 115V AC, 230V AC, 115V AC, 208V AC to 230V AC, 120V AC, 240V AC |
| Number of Speeds | 1 |
| Conduit Box Position | Not Applicable |
| Number of Shafts | 1 |
| Bearing Type | Ball |
| Usable @ 208V | Not Usable at 208V |
| Body Diameter | 5.6 in |
| Insulation Class | B |
| Weight | 6.7 kg |
| Compatible Brand | Dayton |
| Compatible Capacitor Manufacturer Model Number | Not Applicable |
| Conduit Box Location | Exterior |
| Sub Application | Blower, Fan |
| Usable @ 200V | Not Usable at 200V |
| Mounting Stud Thread Size | M5 |
| Run Time - Maximum | Not Applicable |
| Drive Type | Direct Drive |
| Bolt Circle Diameter | 5-1/8 in |
| Shaft Design | Flat |
| Mounting Stud Length | 186 mm |
| Nameplate Service Factor @ 50 Hz | 1 |
| Manufacturers Warranty | 1 yr |
| Ambient Temperature - Maximum | 40 deg C |
| Motor Enclosure Type | Totally Enclosed Air-Over |
| Nameplate RPM @ 50 Hz | Not Applicable |
| Frame Material | Steel |
| Frame Size | Non-Standard |
| Mounting Position | Horizontal |
| Duty Ratio | Not Applicable |
| Ring to Ring Center | Not Applicable |
| Nameplate Service Factor @ 60 Hz | 1 |
| Nameplate Voltage @ 50 Hz | 115V AC |
| Resilient Ring Diameter | Not Applicable |
| Duty | Continuous |
| Shaft Diameter | 17 mm |
| Includes | Not Applicable |
| Compatible Manufacturer Part Number | 1BLJ3C |
| Nameplate Horsepower @ 50 Hz | Not Applicable |
| Efficiency Rating | Not Applicable |
| Mounting Stud Location | 4/Shaft End |
| Full Load Current @ 50 Hz | Not Applicable |
| Nominal Efficiency | 56% |
| Product Type | Definite Purpose HVAC Motor |
| Frequency | 60 Hz |
| Full Load Current @ 60 Hz | 2.75 A |
| Wire Rope Length | 9-3/4 in |
| Length | 9-3/4 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |