Definite Purpose HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/6 hp HP, Nameplate RPM 1,625 RPM, No. of Speeds 1, Voltage 115V AC, Full Load Amps 3.0 A, Non-Standard Frame, Replacement For Dayton 1BLJ1C, Usable @ 208V Not Usable at 208V, Usable @ 200V Not Usable at 200V, 60 Hz Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CWSE
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Frame | Non-Standard |
| HP | 1/6 hp |
| Item | Corrosion Resistant Direct Drive Motor |
| Motor Application | OEM Replacement |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Totally Enclosed Air-Over |
| Motor Mounting Type | Stud |
| Motor Shaft Rotation | Clockwise Shaft End |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Thermal Protection | Auto |
| Nameplate RPM | 1625 rpm |
| No. of Speeds | 1 |
| OEM Replacement Brand | Dayton |
| Phase | Single |
| RPM Range | 1601-1700 |
| Shaft Dia. | 12 mm |
| Shaft Length | 3 in |
| Voltage | 115V AC |
| Motor Bearings | Ball |
| Replacement For | Dayton 1BLJ1C |
| Ins. Class | B |
| Max. Ambient Temp. | 40 deg C |
| Length Less Shaft | 5-5/8 in |
| Bolt Circle Dia. | 1-31/32 in |
| Full Load Amps | 3A |
| Body Dia. | 5-3/32 in |
| Capacitor Required | Included |
| Manufacturers Warranty Length | 1 yr |
| Overall Length | 8-5/8 in |
| Standards | UL |
| Hz | 60 Hz |
| Motor Service Factor | 1 |
| Application | Exhaust Fans |
| Mounting Stud Pattern | 3-9/32 in x 3-9/32 in |
| Voltage Compatibility | 115V AC, 120V AC, 115V AC, 230V AC, 115V AC, 208V AC to 230V AC, 120V AC, 240V AC |
| Number of Speeds | 1 |
| Drive Type | Direct Drive |
| Run Time - Maximum | Not Applicable |
| Duty | Continuous |
| Usable @ 208V | Not Usable at 208V |
| Motor Enclosure Type | Totally Enclosed Air-Over |
| Conduit Box Position | Not Applicable |
| Full Load Current @ 50 Hz | Not Applicable |
| Mounting Stud Length | 144 mm |
| Bearing Type | Ball |
| Resilient Ring Diameter | Not Applicable |
| Mounting Stud Thread Size | M5 |
| Duty Ratio | Not Applicable |
| Product Type | Definite Purpose HVAC Motor |
| Frequency | 60 Hz |
| Nameplate RPM @ 50 Hz | Not Applicable |
| Nameplate Voltage @ 50 Hz | 115V AC |
| Bolt Circle Diameter | 4-5/8 in |
| Insulation Class | B |
| Full Load Current @ 60 Hz | 3.0 A |
| Shaft Diameter | 12 mm |
| Nominal Efficiency | 49% |
| Body Diameter | 5.1 in |
| Weight | 4.24 kg |
| Compatible Brand | Dayton |
| Conduit Box Location | Exterior |
| Manufacturers Warranty | 1 yr |
| Compatible Manufacturer Part Number | 1BLJ1C |
| Frame Size | Non-Standard |
| Nameplate Service Factor @ 60 Hz | 1 |
| Frame Material | Steel |
| Sub Application | Blower, Fan |
| Usable @ 200V | Not Usable at 200V |
| Includes | Not Applicable |
| Ring to Ring Center | Not Applicable |
| Number of Shafts | 1 |
| Mounting Position | Horizontal |
| Nameplate Horsepower @ 50 Hz | Not Applicable |
| Nameplate Service Factor @ 50 Hz | 1 |
| Shaft Design | Flat |
| Compatible Capacitor Manufacturer Model Number | Not Applicable |
| Efficiency Rating | Not Applicable |
| Mounting Stud Location | 4/Shaft End |
| Ambient Temperature - Maximum | 40 deg C |
| Wire Rope Length | 8-5/8 in |
| Length | 8-5/8 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |