DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 24V DC, Motor Type Permanent Magnet DC, Nameplate Speed 30 RPM, Maximum Torque 254 in-lb, Overhung Load Capacity 291 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 60:1, Input Horsepower 1/8 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Needle with Thrust Ball on Output Shaft
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 24V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 254 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 30 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Length Less Shaft | 10.38 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 5.45 A |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/8 hp |
| Lubrication | Permanent Gear Oil |
| Tachometer Feedback | Yes |
| Replacement Brushes | 6YHY5 |
| Voltage | 24V DC |
| Gear Material | Hardened Steel |
| Housing Material | Aluminum |
| Bearings | Ball on Motor, Needle with Thrust Ball on Output Shaft |
| RPM Range | 16 to 30 |
| Rear Shaft Encoder/Pulse Generator Mounting | Yes |
| Mounting | All Position |
| Rotation | CW, CCW |
| Enclosure | TENV |
| Overall Length | 11.38 in |
| Gear Ratio | 60:1 |
| Gear Case | Die Cast Aluminum |
| Overhung Load | 291 lb |
| Reversible Shaft Output | No |
| Shaft Length (Dimension V) | 1 in |
| Max. Ambient Temp. | 40 deg C |
| Motor Type | Permanent Magnet DC |
| Shaft Orientation | Parallel |
| Brushes | Externally Replaceable |
| Shaft Dia. (Dimension U) | 3/4 in |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Thermal Protection | None |
| Operating Voltage | 24V DC |
| Replaceable Motor Brushes | Yes |
| Output Shaft Length | 1 in |
| Output Shaft Diameter | 3/4 in |
| Nameplate Speed | 30 RPM |
| Bearing Type | Ball on Motor, Needle with Thrust Ball on Output Shaft |
| Seal Type | Spring Loaded Lip Type on Input and Output Shaft |
| Full Load Current | 5.45 A |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Input Horsepower | 0.125 HP |
| Seal Material | Plastic |
| Maximum Torque | 254 in-lb |
| Mounting Orientation | Any Angle |
| Overhung Load Capacity | 291 lb |
| Maximum Ambient Temperature | 40 deg C |
| Wire Rope Length | 11.38 in |
| Length | 11.38 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |