DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 11 RPM, Maximum Torque 50 in-lb, Overhung Load Capacity 50 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 273:1, Input Horsepower 1/30 hp, Output Shaft Diameter 5/16 in, Bearing Type Ball on Motor, Porous Bronze Sleeve on Case
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 90V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 50 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 11 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Length Less Shaft | 6.13 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 0.35 A |
| Keyway Size Type | Flat |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/30 hp |
| Insulation Class | F |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Lubrication | Grease Filled |
| Shaft Orientation | Parallel |
| Housing Material | Die Cast Zinc |
| Motor Type | Permanent Magnet DC |
| Shaft Length (Dimension V) | 3/4 in |
| Rotation | CW, CCW |
| Shaft | Single Output |
| Mounting | All Position |
| Voltage | 90V DC |
| Overall Length | 6.88 in |
| Max. Ambient Temp. | 40 deg C |
| Bearings | Ball on Motor, Porous Bronze Sleeve on Case |
| Brushes | Externally Replaceable |
| Keyway Size | Flat |
| Overhung Load | 50 lb |
| Finish | Unpainted |
| Shaft Dia. (Dimension U) | 5/16 in |
| Gear Ratio | 273:1 |
| Reversible Shaft Output | No |
| Dimension A | 6.2 in |
| RPM Range | 0 to 15 |
| Enclosure | TENV |
| Gear Material | Acetyl, Steel |
| Seals | O-ring Type on Output Shaft |
| Tachometer Feedback | No |
| Gear Case | Die Cast Zinc |
| Replacement Brushes | 6YHY3 |
| Thermal Protection | None |
| Mounting Orientation | Any Angle |
| Input Horsepower | 1/30 hp |
| Keyway Type | Flat |
| Output Shaft Diameter | 5/16 in |
| Operating Voltage | 90V DC |
| Replaceable Motor Brushes | Yes |
| Maximum Torque | 50 in-lb |
| Nameplate Speed | 11 RPM |
| Full Load Current | 0.35 A |
| Overhung Load Capacity | 50 lb |
| Housing Material Finish | Unpainted |
| Output Shaft Length | 3/4 in |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Bearing Type | Ball on Motor, Porous Bronze Sleeve on Case |
| Maximum Ambient Temperature | 40 deg C |
| Seal Type | O-Ring Type |
| Wire Rope Length | 6.88 in |
| Length | 6.88 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |