Motorreductor de CD, orientación del eje paralela, carcasa del motor totalmente cerrada sin ventilación, voltaje de operación 90 V CD, tipo de motor de CD de imán permanente, velocidad en placa 6 RPM, par máximo 500 in-lb, capacidad de carga suspendida 300 lb, rotación CW/CCW, orientación de montaje en cualquier ángulo, relación de engranaje 264:1, potencia de entrada 1/11 hp, diámetro del eje de salida 3/4 in, tipo de cojinete de bolas en el motor, cojinete de bronce poroso en la carcasa
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 90V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 500 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 6 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Length Less Shaft | 8.88 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 1.1 A |
| Keyway Size Type | 9/50 sq in x 1 in |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/11 hp |
| Gear Type | Helical, Spur |
| Housing Material | Aluminum |
| Seals | Lip Type on Input and Output Shaft |
| Replacement Brushes | 6YHY6 |
| Overall Length | 10.38 in |
| Gear Material | Hardened Steel |
| Finish | Unpainted |
| Keyway Size | 9/50" Square x 1" |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Shaft Length (Dimension V) | 1-3/8 in |
| Max. Ambient Temp. | 40 deg C |
| Insulation Class | F |
| Motor Type | Permanent Magnet DC |
| Shaft Orientation | Parallel |
| Overhung Load | 300 lb |
| RPM Range | 0 to 15 |
| Rotation | CW, CCW |
| Brushes | Externally Replaceable |
| Shaft Dia. (Dimension U) | 3/4 in |
| Lubrication | Grease Filled |
| Reversible Shaft Output | No |
| Tachometer Feedback | No |
| Voltage | 90V DC |
| Enclosure | TENV |
| Mounting | All Position |
| Thermal Protection | None |
| Gear Case | Die Cast Aluminum |
| Shaft | Single Output |
| Gear Ratio | 264:1 |
| Bearings | Ball and Needle on Case, Ball on Motor |
| Input Horsepower | 1/11 hp |
| Replaceable Motor Brushes | Yes |
| Seal Type | Lip Type on Input and Output Shaft |
| Mounting Orientation | Any Angle |
| Maximum Ambient Temperature | 40 deg C |
| Maximum Torque | 500 in-lb |
| Nameplate Speed | 6 RPM |
| Housing Material Finish | Unpainted |
| Keyway Type | 9/50 sq in x 1 in |
| Overhung Load Capacity | 300 lb |
| Operating Voltage | 90V DC |
| Output Shaft Diameter | 3/4 in |
| Full Load Current | 1.1 A |
| Output Shaft Length | 1-3/8 in |
| Bearing Type | Ball on Motor, Porous Bronze Sleeve on Case |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Wire Rope Length | 10.38 in |
| Length | 10.38 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |