DC Gearmotor, Shaft Orientation Right Angle, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 180 RPM, Maximum Torque 55 in-lb, Overhung Load Capacity 175 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 10:1, Input Horsepower 1/4 hp, Output Shaft Diameter 5/8 in, Bearing Type Oversized Ball
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 90V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 55 in-lb |
| Gearmotor Shaft Type | Single Right |
| Gearmotor Shaft Orientation | Right Angle |
| Nameplate RPM | 180 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 2.33 A |
| Keyway Size Type | 3/16 sq in x 1 in |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/4 hp |
| Replacement Brushes | 6YHY6 |
| Overhung Load | 175 lb |
| Thermal Protection | None |
| Gear Ratio | 10:1 |
| Bearings | Oversized Ball |
| Mounting | All Position |
| Shaft Length (Dimension V) | 1-1/2 in |
| RPM Range | 151 to 200 |
| Motor Type | Permanent Magnet DC |
| Gear Case | Die Cast Aluminum |
| Rear Shaft Encoder/Pulse Generator Mounting | Yes |
| Finish | Powder Coated Gloss Black |
| Shaft Orientation | Right Angle |
| Keyway Size | 3/16" Square x 1" |
| Gear Material | Bronze Alloy Output Gear, Hardened Steel Worm |
| Enclosure | TENV |
| Rotation | CW, CCW |
| Voltage | 90V DC |
| Max. Ambient Temp. | 40 deg C |
| Gear Type | Worm |
| Reversible Shaft Output | Yes |
| Lubrication | Permanent Gear Oil |
| Housing Material | Aluminum |
| Shaft Dia. (Dimension U) | 5/8 in |
| Tachometer Feedback | Yes |
| Insulation Class | F |
| Brushes | Externally Replaceable |
| Seals | Lip Type on Input and Output Shaft |
| Output Shaft Length | 1-1/2 in |
| Maximum Torque | 55 in-lb |
| Output Shaft Diameter | 5/8 in |
| Operating Voltage | 90V DC |
| Input Horsepower | 0.25 HP |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Overhung Load Capacity | 175 lb |
| Mounting Orientation | Any Angle |
| Full Load Current | 2.33 A |
| Housing Material Finish | Powder Coated Gloss Black |
| Keyway Type | 3/16 sq in x 1 in |
| Seal Type | Lip Type on Input and Output Shaft |
| Maximum Ambient Temperature | 40 deg C |
| Nameplate Speed | 180 RPM |
| Bearing Type | Oversized Ball |
| Replaceable Motor Brushes | Yes |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |