DC Gearmotor, Shaft Orientation Right Angle, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 45 RPM, Maximum Torque 56 in-lb, Overhung Load Capacity 100 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 37:1, Input Horsepower 1/20 hp, Output Shaft Diameter 1/2 in, Bearing Type Porous Bronze Sleeve on Case, Sleeve on Motor
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 90V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 56 in-lb |
| Gearmotor Shaft Type | Single Right |
| Gearmotor Shaft Orientation | Right Angle |
| Nameplate RPM | 45 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 0.59 A |
| Keyway Size Type | #404 Woodruff Key |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/20 hp |
| Gear Case | Die Cast Zinc |
| RPM Range | 31 to 50 |
| Finish | Unpainted |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Reversible Shaft Output | No |
| Tachometer Feedback | No |
| Seals | Lip Type on Output Shaft |
| Brushes | Externally Replaceable |
| Bearings | Ball on Motor, Porous Bronze Sleeve on Case |
| Shaft Orientation | Right Angle |
| Replacement Brushes | 6YHY6 |
| Motor Type | Permanent Magnet DC |
| Gear Type | Worm |
| Gear Material | Cast Iron Output Gear, Hardened Steel Worm, Steel Input Gear |
| Lubrication | Grease Filled |
| Mounting | All Position |
| Shaft Length (Dimension V) | 1-5/8 in |
| Housing Material | Die Cast Zinc |
| Gear Ratio | 37:1 |
| Overhung Load | 100 lb |
| Shaft | Right Hand Output |
| Thermal Protection | None |
| Voltage | 90V DC |
| Insulation Class | F |
| Keyway Size | #404 Woodruff Key |
| Max. Ambient Temp. | 40 deg C |
| Shaft Dia. (Dimension U) | 1/2 in |
| Rotation | CW, CCW |
| Enclosure | TENV |
| Operating Voltage | 90V DC |
| Output Shaft Diameter | 1/2 in |
| Keyway Type | Woodruff #404 |
| Full Load Current | 0.59 A |
| Replaceable Motor Brushes | Yes |
| Seal Type | Type on Output Shaft |
| Output Shaft Length | 1-5/8 in |
| Input Horsepower | 1/20 hp |
| Bearing Type | Porous Bronze Sleeve on Case, Sleeve on Motor |
| Overhung Load Capacity | 100 lb |
| Maximum Torque | 56 in-lb |
| Nameplate Speed | 45 RPM |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Housing Material Finish | Unpainted |
| Mounting Orientation | Any Angle |
| Maximum Ambient Temperature | 40 deg C |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |