DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 15 RPM, Maximum Torque 570 in-lb, Overhung Load Capacity 900 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 116:1, Input Horsepower 1/6 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Needle Throughout
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 90V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 570 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 15 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Length Less Shaft | 12-1/2 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 1.7 A |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/6 hp |
| Gear Case | Die Cast Aluminum |
| Mounting | All Position |
| Gear Type | Helical, Spur |
| Overhung Load | 900 lb |
| Bearings | Ball on Motor, Needle Throughout with Thrust Balls on Case |
| Shaft Dia. (Dimension U) | 3/4 in |
| Housing Material | Aluminum |
| Voltage | 90V DC |
| Shaft Length (Dimension V) | 1-7/8 in |
| Gear Ratio | 116:1 |
| Reversible Shaft Output | No |
| Thermal Protection | None |
| Brushes | Externally Replaceable |
| Shaft Orientation | Parallel |
| Dimension D | 3.13 in |
| RPM Range | 0 to 15 |
| Rotation | CW, CCW |
| Gear Material | Hardened Steel |
| Rear Shaft Encoder/Pulse Generator Mounting | Yes |
| Dimension H | 5.11 in |
| Max. Ambient Temp. | 40 deg C |
| Dimension A | 12.43 in |
| Lubrication | Permanent Gear Oil |
| Overall Length | 14.38 in |
| Replacement Brushes | 6YHY6 |
| Enclosure | TENV |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Motor Type | Permanent Magnet DC |
| Tachometer Feedback | Yes |
| Mounting Orientation | Any Angle |
| Overhung Load Capacity | 900 lb |
| Input Horsepower | 0.1667 HP |
| Seal Material | Plastic |
| Nameplate Speed | 15 RPM |
| Full Load Current | 1.7 A |
| Operating Voltage | 90V DC |
| Output Shaft Length | 1-7/8 in |
| Seal Type | Spring Loaded Lip Type on Input and Output Shaft |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Maximum Torque | 570 in-lb |
| Output Shaft Diameter | 3/4 in |
| Replaceable Motor Brushes | Yes |
| Bearing Type | Ball on Motor, Needle Throughout |
| Maximum Ambient Temperature | 40 deg C |
| Wire Rope Length | 14.38 in |
| Length | 14.38 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |