DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 24V DC, Motor Type Permanent Magnet DC, Nameplate Speed 120 RPM, Maximum Torque 60 in-lb, Overhung Load Capacity 250 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 15:1, Input Horsepower 1/8 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Needle with Thrust Ball on Output Shaft
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 24V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 60 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 120 RPM |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CW, CCW |
| Length Less Shaft | 10.38 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 5.45 A |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/8 hp |
| Gear Ratio | 15:1 |
| Rear Shaft Encoder/Pulse Generator Mounting | Yes |
| RPM Range | 101 to 150 |
| Enclosure | TENV |
| Gear Type | Hardened Steel |
| Thermal Protection | None |
| Voltage | 24V DC |
| Replacement Brushes | 6YHY5 |
| Seals | Spring Loaded Lip Type on Input and Output Shaft |
| Gear Case | Die Cast Aluminum |
| Shaft Length (Dimension V) | 1 in |
| Tachometer Feedback | Yes |
| Max. Ambient Temp. | 40 deg C |
| Mounting | All Position |
| Lubrication | Permanent Gear Oil |
| Shaft Dia. (Dimension U) | 3/4 in |
| Motor Type | Permanent Magnet DC |
| Rotation | CW, CCW |
| Overhung Load | 250 lb |
| Shaft Orientation | Parallel |
| Bearings | Ball on Motor, Needle with Thrust Ball on Output Shaft |
| Brushes | Externally Replaceable |
| Overall Length | 12.34 in |
| Maximum Torque | 60 in-lb |
| Seal Type | Lip Type on Input and Output Shaft |
| Bearing Type | Ball on Motor, Needle with Thrust Ball on Output Shaft |
| Full Load Current | 5.45 A |
| Nameplate Speed | 120 RPM |
| Replaceable Motor Brushes | Yes |
| Output Shaft Length | 1-1/2 in |
| Seal Material | Plastic |
| Operating Voltage | 24V DC |
| Overhung Load Capacity | 250 lb |
| Mounting Orientation | Any Angle |
| Maximum Ambient Temperature | 40 deg C |
| Output Shaft Diameter | 3/4 in |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Input Horsepower | 0.125 HP |
| Wire Rope Length | 12.34 in |
| Length | 12.34 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |