DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Fan-Cooled, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 40 RPM, Maximum Torque 664 in-lb, Overhung Load Capacity 325 lb, Rotation CW/CCW, Output Shaft Height 3 in, Mounting Orientation Any Angle, Gear Ratio 41:1, Input Horsepower 1/2 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Heavy Duty Ball and Thrust Balls on Case
| Item | DC Gearmotor |
|---|---|
| Gearmotor Voltage | 90V DC |
| Gearmotor Type | DC Gearmotor |
| Max. Torque | 664 in-lb |
| Gearmotor Shaft Type | Single |
| Gearmotor Shaft Orientation | Parallel |
| Nameplate RPM | 40 RPM |
| Gearmotor Enclosure | Totally Enclosed Fan-Cooled |
| Gearmotor Rotation | CW, CCW |
| Length Less Shaft | 14 in |
| Gearmotor Mounting Position | All Angle |
| Full Load Amps | 5 A |
| Standards | C-UL Recognized, UL Recognized |
| Input HP | 1/2 hp |
| Rotation | CW, CCW |
| Gear Ratio | 41:1 |
| Thermal Protection | None |
| Overhung Load | 325 lb |
| Overall Length | 15-1/2 in |
| Shaft Dia. (Dimension U) | 3/4 in |
| Replacement Brushes | 6YHY9 |
| Mounting | All Position |
| Lubrication | Permanent Gear Oil |
| Bearings | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
| Max. Ambient Temp. | 40 deg C |
| Housing Material | Aluminum |
| Motor Type | Permanent Magnet DC |
| Voltage | 90V DC |
| Brushes | Externally Replaceable |
| Shaft Length (Dimension V) | 1-1/2 in |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Gear Material | Hardened Steel |
| RPM Range | 31 to 50 |
| Tachometer Feedback | No |
| Seals | Lip Type on Input and Output Shaft |
| Reversible Shaft Output | No |
| Gear Case | Die Cast Aluminum |
| Enclosure | TEFC |
| Gear Type | Helical, Spur |
| Shaft Orientation | Parallel |
| Overall Height | 6.63 in |
| Overall Width | 8.13 in |
| Output Shaft Diameter | 3/4 in |
| Keyway Depth | 3/16 in |
| Maximum Ambient Temperature | 40 deg C |
| Input Horsepower | 0.5 HP |
| Output Shaft Length | 1-1/2 in |
| Overhung Load Capacity | 325 lb |
| Maximum Torque | 664 in-lb |
| Bearing Type | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
| Operating Voltage | 90V DC |
| Nameplate Speed | 40 RPM |
| Mount Hole Center-to-Center Length | 2-1/2 in |
| Motor Enclosure | Totally Enclosed Fan-Cooled |
| Keyway Width | 1/8 in |
| Output Shaft Height | 3 in |
| Full Load Current | 5 A |
| Mounting Orientation | Any Angle |
| Seal Type | Lip Type on Input and Output Shaft |
| Mount Hole Center-to-Center Width | 7.13 in |
| Replaceable Motor Brushes | Yes |
| Wire Rope Length | 15-1/2 in |
| Length | 15-1/2 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |