Fan and Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/3 hp HP, Nameplate RPM 1,075 RPM, No. of Speeds 3, Voltage 208-230V AC, 2.4-2.4 A Full Load Amps, 48YZ Frame, 60 Hz Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Duty Cycle Continuous, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air Over, Motor Mounting Type Resilient Ring, Stud, Motor Mounting Position All Angle, Shaft Length 4 in
| Resilient Ring Dia. | 2-1/4 in |
|---|---|
| Voltage | 208V AC to 230V AC |
| Nameplate RPM | 1,075 |
| Item | Fan and Blower Motor |
| Motor Application | HVAC, R |
| Ring to Ring Center | 5-1/4 in |
| Shaft Dia. | 1/2 in |
| Motor Mounting Type | Ring/Stud |
| Capacitor Required | Capacitor Not Included |
| Phase | Single |
| Overall Length | 9-11/16 in |
| Motor Thermal Protection | Auto |
| No. of Speeds | 3 |
| Frame | 48YZ |
| Includes | Split Rings to Increase Ring Diameter to 2 1/2 in |
| Motor Sub Application | Direct Drive |
| Max. Ambient Temp. | 40 deg C |
| Motor Service Factor | 1 |
| Voltage Compatibility | 115V AC, 208V AC to 230V AC, 200V AC to 230V AC, 208V AC to 220V AC, 440V AC, 208V AC to 230V AC, 277V AC, 208V AC to 230V AC, 440V AC, 208V AC to 230V AC, 460V AC, 208V AC to 230V AC, 208V AC to 240V AC |
| Motor Enclosure Design | Open Air-Over |
| Standards | CSA Certification (258501), UL Component Recognition (E37403) |
| Nominal Efficiency | 60.3% |
| Shaft Length | 4 in |
| Full Load Amps | 2.4-2.4 A |
| Motor Design | Permanent Split Capacitor |
| Motor Mounting Position | All Angle |
| Duty | Continuous |
| HP | 1/3 |
| Hz | 60 |
| Ins. Class | B |
| Motor Bearings | Sleeve |
| Bolt Circle Dia. | 5-1/8 in |
| Application | Blowers, Fans and Air Circulators |
| Motor Shaft Rotation | CCW, CW |
| Motor Shaft Design | Flat |
| RPM Range | 1,001-1,100 |
| Length Less Shaft | 5-11/16 in |
| Body Dia. | 5-5/8 in |
| Stud Size | 8-32 NC 2A Thread x 1 5/8 in |
| Duty Cycle | Continuous |
| Mounting | Stud |
| Number of Speeds | 3 |
| Shaft Diameter | 1/2 in |
| Frequency | 60 Hz |
| Resilient Ring Diameter | 2-1/4 in |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Bearing Type | Sleeve |
| Nameplate Service Factor @ 60 Hz | 1 |
| Insulation Class | B |
| Bolt Circle Diameter | 5-1/8 in |
| Motor Enclosure Type | Open Air Over |
| Shaft Design | Flat |
| Sub Application | General Purpose |
| Ambient Temperature - Maximum | 40 deg C |
| Product Type | Blower Motor, Fan |
| Frame Size | 48YZ |
| Stack Size | Not Applicable |
| Body Diameter | 5.6 in |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Full Load Current @ 60 Hz | 2.4-2.4 A |
| Drive Type | Direct Drive |
| Mounting Position | All Angle |
| Wire Rope Length | 9-11/16 in |
| Length | 9-11/16 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |