Fan and Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/4 hp HP, Nameplate RPM 1,625 RPM, No. of Speeds 3, Voltage 115V AC, 3.4 A Full Load Amps, 48YZ Frame, 60 Hz Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Duty Cycle Continuous, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Shaft Length 6 in, Shaft Dia. 1/2 in
| Motor Mounting Type | Ring/Stud |
|---|---|
| Standards | CSA Certification (258501), UL Recognition (E47479) |
| HP | 1/4 |
| Ins. Class | B |
| Includes | Kit for 2-1/2 in Hub Ring Assembly |
| Max. Ambient Temp. | 40 deg C |
| No. of Speeds | 3 |
| Motor Shaft Rotation | CCW, CW |
| Resilient Ring Dia. | 2-1/4 in |
| Ring to Ring Center | 5 in |
| Motor Shaft Design | Flat |
| Nameplate RPM | 1,625 |
| Voltage Compatibility | 115V AC, 208V AC to 230V AC, 115V AC, 230V AC, 115V AC, 120V AC, 240V AC, 120V AC |
| Motor Bearings | Sleeve |
| Nominal Efficiency | 57.6% |
| Item | Fan and Blower Motor |
| RPM Range | 1,601-1,700 |
| Motor Application | HVAC, R |
| Phase | Single |
| Capacitor Required | Capacitor Not Included |
| Motor Sub Application | Direct Drive |
| Hz | 60 |
| Overall Length | 11-7/16 in |
| Motor Mounting Position | All Angle |
| Body Dia. | 5-5/8 in |
| Voltage | 115V AC |
| Length Less Shaft | 5-7/16 in |
| Full Load Amps | 3.4 A |
| Application | Blowers, Fans and Air Circulators |
| Bolt Circle Dia. | 5-1/8 in |
| Shaft Dia. | 1/2 in |
| Motor Design | Permanent Split Capacitor |
| Duty | Continuous |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Shaft Length | 6 in |
| Motor Enclosure Design | Open Air-Over |
| Frame | 48YZ |
| Stud Size | 8-32 NC 2A Thread x 1 5/8 in |
| Duty Cycle | Continuous |
| Number of Speeds | 3 |
| Mounting | Stud |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Resilient Ring Diameter | 2-1/4 in |
| Frequency | 60 Hz |
| Drive Type | Direct Drive |
| Shaft Design | Flat |
| Shaft Diameter | 1/2 in |
| Motor Enclosure Type | Open Air Over |
| Product Type | Blower Motor, Fan |
| Sub Application | General Purpose |
| Bearing Type | Sleeve |
| Full Load Current @ 60 Hz | 3.4 A |
| Ambient Temperature - Maximum | 40 deg C |
| Insulation Class | B |
| Stack Size | Not Applicable |
| Bolt Circle Diameter | 5-1/8 in |
| Body Diameter | 5.6 in |
| Frame Size | 48YZ |
| Mounting Position | All Angle |
| Nameplate Service Factor @ 60 Hz | 1 |
| Wire Rope Length | 11-7/16 in |
| Length | 11-7/16 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |