Fan and Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/4 hp HP, Nameplate RPM 1,075 RPM, No. of Speeds 4, Voltage 208-230V AC, 1.8-1.7 A Full Load Amps, 48YZ Frame, 60 Hz Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Duty Cycle Continuous, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Shaft Length 6 in, Shaft Dia. 1/2 in
| Item | Fan and Blower Motor |
|---|---|
| RPM Range | 1,001-1,100 |
| Overall Length | 11-7/16 in |
| Motor Mounting Position | All Angle |
| Resilient Ring Dia. | 2-1/4 in |
| Application | Blowers, Fans and Air Circulators |
| Length Less Shaft | 5-7/16 in |
| Ins. Class | B |
| Motor Service Factor | 1 |
| Includes | Split Rings to Increase Ring Diameter to 2 1/2 in |
| Motor Mounting Type | Ring/Stud |
| Bolt Circle Dia. | 5-1/8 in |
| Voltage Compatibility | 115V AC, 208V AC to 230V AC, 200V AC to 230V AC, 208V AC to 220V AC, 440V AC, 208V AC to 230V AC, 277V AC, 208V AC to 230V AC, 440V AC, 208V AC to 230V AC, 460V AC, 208V AC to 230V AC, 208V AC to 240V AC |
| Capacitor Required | Capacitor Not Included |
| Motor Bearings | Ball |
| Duty | Continuous |
| Motor Enclosure Design | Open Air-Over |
| Motor Application | HVAC, R |
| Hz | 60 |
| Shaft Dia. | 1/2 in |
| Phase | Single |
| Max. Ambient Temp. | 40 deg C |
| Nameplate RPM | 1,075 |
| Motor Thermal Protection | Auto |
| Motor Shaft Rotation | CCW, CW |
| HP | 1/4 |
| Motor Design | Permanent Split Capacitor |
| Nominal Efficiency | 64.3% |
| Motor Shaft Design | Double Flat |
| Voltage | 208V AC to 230V AC |
| Frame | 48YZ |
| Standards | CSA Certified (258501), UL Recognized (E37403) |
| Full Load Amps | 1.8-1.7 A |
| No. of Speeds | 4 |
| Ring to Ring Center | 5 in |
| Motor Sub Application | Direct Drive |
| Shaft Length | 6 in |
| Body Dia. | 5-5/8 in |
| Duty Cycle | Continuous |
| Number of Speeds | 4 |
| Mounting | Stud |
| Resilient Ring Diameter | 2-1/4 in |
| Nameplate Service Factor @ 60 Hz | 1 |
| Shaft Diameter | 1/2 in |
| Ambient Temperature - Maximum | 40 deg C |
| Stack Size | Not Applicable |
| Insulation Class | B |
| Bolt Circle Diameter | 5-1/8 in |
| Drive Type | Direct Drive |
| Shaft Design | Double Flat |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Frame Size | 48YZ |
| Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
| Frequency | 60 Hz |
| Motor Enclosure Type | Open Air Over |
| Mounting Position | All Angle |
| Body Diameter | 5.6 in |
| Sub Application | General Purpose |
| Bearing Type | Ball |
| Full Load Current @ 60 Hz | 1.8-1.7 A |
| Product Type | Blower Motor, Fan |
| Wire Rope Length | 11-7/16 in |
| Length | 11-7/16 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |