Electric Drum Pump, Hose Inside Dia. 1 in, Max. Head Pressure 16 psi, Max. Oil Flow 7 gpm, Max. Outlet Pressure 16 psi, For Use With 9500, Rated Voltage 110 V AC, Plug Type NEMA 5-15P, Suction Tube OD 1 5/8 in, Hose Length 6 ft, Suction Tube Length 39 in, Cord Length 16 ft, Includes Bung Adapter Yes, Runs Dry Yes, Nozzle Operation Manual, Thermal Protection Yes, Frequency (Hz) 50/60 Hz, Power Source Corded Electric, Variable Speed Yes, Includes Discharge Hose Yes, Self-Priming Yes
| For Use With | 9500 |
|---|---|
| Item | Electric Drum Pump |
| Max. Viscosity | 300 cps |
| Motor Type | Electric AC Brush |
| Power Source | Corded Electric |
| Outlet Size | 1" barb |
| Wetted Materials | Carbon Graphite, Ceramic, Halar, Hastelloy C-276, Polypropylene, PVC, PVDF, Viton |
| Voltage | 110V AC |
| Motor Enclosure | ODP |
| Metered | Yes |
| Max. Flow GPM | 32 gpm |
| Motor RPM | 0-10,000 |
| Standards | ETL Motor |
| Discharge Tube Length | 6 ft |
| Housing Material | Polypropylene |
| Type | Motor and Tube |
| Agency Compliance | ETL Recognized Component |
| GPM | 32 |
| Discharge Tubing Material | PVC |
| Inlet Size | 1.6 in |
| Pump Body Material | Polypropylene |
| Max. Pressure | 16 psi |
| Hz | 60 Hz |
| Application | To Transfer Very Concentrated and Extremely Aggressive Liquids |
| Adapter Dia. | 2 in |
| Suction Tube Length | 39 in |
| Max. GPM for Water | 35 |
| Overall Length | 51 in |
| Suction Tube Type | Centrifugal |
| RPM | 10,000 |
| Max. Temp. | 130 deg F |
| Max. GPM for Oil | 7 |
| DEF Compatible | No |
| Action Type | Centrifugal |
| Adapter Material | Polypropylene |
| Self-Priming | Yes |
| Phase | Single |
| Height | 39 in |
| HP | 1 |
| Max. Liquid Temp. | 130 deg F |
| Max. Head | 36 ft |
| Adapter Type | Bung |
| Nozzle Operation | Manual |
| Frequency (Hz) | 50/60 Hz |
| Seal Material | Sealless |
| Cord Length | 16 ft |
| Max. Head Pressure | 16 psi |
| Suction Tube ID | 1-5/16 in |
| Nozzle Material | Polypropylene |
| Includes Discharge Hose | Yes |
| For Media Type | Acetic Acid, Ammonia, Calcium Chloride, Chromic Acid, Citric Acid, Ethylene Glycol, Glycerin, Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid, Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide, Sulfuric Acid, Water |
| Suction Tube OD | 1-5/8 in |
| Full Load Amps | 8.5 A |
| Includes Nozzle | Yes |
| Number of Phases | 1 |
| Noise Level | 84 dB |
| Discharge Connection Type | Hose Barb |
| Variable Speed | Yes |
| Plug Type | NEMA 5-15P |
| Max. Oil Flow | 7 gpm |
| Max. Flow Rate | 13 gpm |
| Housing Material - Pumps | Polypropylene |
| Includes Suction Tube | Yes |
| Hose Inside Dia. | 1 in |
| Hose Length | 6 ft |
| Hose Cover Material | PVC |
| Discharge Tube Outlet ID | 1 in |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Ammonia (Liquids), Calcium Chloride, Chromic Acid 50%, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Hydrochloric/Muriatic Acid (100%), Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrofluoric Acid (20%), Nitric Acid (10% Solution), Phosphoric Acid (40% Solution), Potassium Hydroxide (50%), Salt Water, Sodium Bicarbonate (10%), Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sulfuric Acid (10% - 75%) |
| Runs Dry | Yes |
| For Container Size | 55 gal |
| Motor HP | 1.1 |
| Discharge Tube Outlet OD | 1-1/2 in |
| Diesel Exhaust Fluid Compatible | No |
| Hose Outside Dia. | 1-1/4 in |
| Duty Cycle | Intermittent |
| Spout Connection Type | Hose Barb |
| Max. Fluid Temp. | 130 deg F |
| Bung Connection Dia. | 2 in |
| For Container Type | Drum |
| Includes Spout | No |
| Thermal Protection | Yes |
| Not Recommended Chemicals | Acetone, Ammonium Hydroxide, Bleach, Chromic Acid 30%, Concentrated Nitric Acid, Cyclohexane, DEF, Ethanol, Ethyl Acetate, Formaldehyde, Formaldehyde 40%, Formic Acid, Gasoline, Glacial Acetic Acid, Heptane, Hexane, Isopropanol, Kerosene, Lacquer Thinners, Methanol, Methyl Chloride, Methyl Ethyl Ketone, Nitric Acid 20% Solution, Nitric Acid 50% Solution, Stoddard Solvent, Sulfuric Acid 75% to 100%, Toluene, Trichlorethylene 50%, Xylene |
| Includes Bung Adapter | Yes |
| Food Grade | No |
| Max. Head - Pumps | 36 ft |
| Hose Tube Material | PVC |
| Suction Tube Material | Polypropylene |
| Max. Outlet Pressure | 16 psi |
| Adapter Connection Type | MNPT |
| Rated Voltage | 110 V AC |
| Gear Lube | NT |
| Grease | NT |
| Motor Enclosure Design | Open Drip Proof |
| Maximum Head Pressure | 16 psi |
| Maximum Oil Flow | 7 gpm |
| Hose Outside Diameter | 1-1/4 in |
| Frequency | 50/60 Hz |
| Maximum Head | 36 ft |
| Maximum Fluid Temperature | 130 deg F |
| Adapter Connection Diameter | 2 in |
| Chemical Compatibility | Acetic Acid 20%, Acetic Acid 80%, Ammonia Liquid, Calcium Chloride, Chromic Acid 50%, Citric Acid 50%, Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Hydrochloric Acid 100%, Hydrochloric Acid 20%, Hydrochloric Acid 37%, Hydrofluoric Acid 20%, Nitric Acid 10% Solution, Phosphoric Acid 40% Solution, Potassium Hydroxide 50%, Salt Water, Sodium Bicarbonate 10%, Sodium Bisulfate, Sodium Bisulfite, Sodium Hydroxide 20%, Sodium Hydroxide 50%, Sulfuric Acid 10% to 75% |
| Motor Horsepower | 1.1 HP |
| Maximum Flow Rate | 13 gpm |
| Hose Inside Diameter | 1 in |
| Maximum Outlet Pressure | 16 psi |
| Adapter Connection Standard | MNPT |
| Wetted Material | Polypropylene, PVDF, Viton, Ceramic, Halar, Hastelloy, PVC, Carbon Graphite C-276 |
| Maximum Viscosity | 300 cps |
| Full Load Current | 8.5 A |
| Power Source - TS Only | Corded Electric |
| Wire Rope Length | 51 in |
| Power Source - old | Corded Electric |
| Length | 51 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |