Floor Drill Press, Primary Material Application Metal, Power Down Feed Included Yes, Drill Press Type Floor Stand, Drill Press Application Boring, Countersinking, Drilling, Reaming, Tapping, Speed Control Variable, Speed Adjustment Knob, Swing 22 in, Spindle-to-Column Distance 11 in, Horsepower 3 hp, Voltage 230V AC, Spindle Taper MT3, Number of Speeds Variable, Chuck Size 5/8 in, Guard Included Yes, Coolant System Yes, Quill Diameter 2 3/4 in, Drilling Capacity in Steel 1 3/16 in
| Item | Floor Drill Press |
|---|---|
| Drive Type | Geared Head |
| Swing | 22 in |
| Voltage | 230V AC |
| Motor HP | 3 hp |
| Chuck Size | 5/8 in |
| Number of Speeds | Variable |
| Capacity Steel | 1-5/32 in |
| Spindle Speed | 80 to 3000 rpm |
| Table Slot Size | 1/2 in |
| Tilting Angle | Non-Tilting |
| Power Down Feed Included | Yes |
| Base Size | 25-3/8 in x 16-5/8 in |
| Corded/Cordless | Corded |
| Spindle Taper | MT3 |
| Includes | Arbor, Chuck, Coolant System, Digital Depth Gauge and Speed Readout, Guard, Light, Tapping Mode, Tool Ejector |
| Quill Dia. | 2-3/4 in |
| Phase | Single Phase |
| Overall Depth | 29 in |
| Hz | 60 Hz |
| Table Work Surface | 15-3/4 in x 19-3/4 in |
| Spindle Travel | 4-15/16 in |
| Number of T-Slots | 4 |
| Drilling Capacity Wood | Not Specified |
| Capacity Cast Iron | 1-1/2 in |
| Max. Spindle To Base | 52 in |
| Amps AC | 10 A |
| Corded/Banded | Corded |
| Overall Height | 75 in |
| Spindle to Table | 30-3/4 in |
| Overall Width | 24 in |
| Column Dia. | 4-1/2 in |
| Application | Production Drill Press |
| Number of Pieces | 10 |
| Speed Adjustment | Knob |
| Coolant System | Yes |
| Maximum Spindle-to-Table Height | 30-3/4 in |
| Base Height | 4 in |
| Guard Included | Yes |
| Drilling Capacity in Steel | 1-3/16 in |
| Horsepower | 3 hp |
| Quill Diameter | 2-3/4 in |
| Spindle-to-Column Distance | 11 in |
| Number of Spindle Speeds | Variable |
| Table Shape | Rectangular |
| Drill Press Type | Floor Stand |
| Column Diameter | 4-1/2 in |
| Speed Control | Variable |
| Chuck Capacity | 5/8 in |
| Primary Material Application | Metal |
| Maximum Overall Height | 75 in |
| Maximum Spindle Speed | 3,000 rpm |
| Drill Press Application | Boring, Countersinking, Drilling, Reaming, Tapping |
| Table Width | 15-3/4 in |
| Table Slot | Yes |
| Base Length | 16-5/8 in |
| Minimum Spindle Speed | 80 RPM |
| Current | 10 A |
| Speed Range | 80 to 3,000 rpm |
| Power Source | Corded |
| Maximum Spindle-to-Base Height | 52 in |
| Table Length | 16-1/2 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |