DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 2.6 RPM, Maximum Torque 100 in-lb, Overhung Load Capacity 90 lb, Rotation CW/CCW, Mounting Orientation Any Angle, Gear Ratio 702:1, Input Horsepower 1/40 hp, Output Shaft Diameter 1/2 in, Bearing Type Ball on Motor, Needle on Case Output Shaft
| Gearmotor Type | DC Gearmotor |
|---|---|
| Shaft Orientation | Parallel |
| Enclosure | TENV |
| Voltage | 90 V DC |
| Motor Type | Permanent Magnet DC |
| Nameplate RPM | 2.6 RPM |
| Max. Torque | 100 in-lb |
| Overhung Load | 90 lb |
| Rotation | CW/CCW |
| Mounting | All Position |
| Gear Ratio | 702:1 |
| Input HP | 1/40 |
| Bearings | Ball on Motor, Needle on Case Output Shaft |
| Full Load Amps | 0.36 A |
| Gear Material | Steel (1st Stage Helical), Steel or Heat Treated Powdered Metal (Subsequent Stages Spur) |
| Length Less Shaft | 7.38 in |
| Lubrication | Oil |
| Seals | Lip Type on Input and Output Shaft |
| Standards | C-UL Recognized, UL Recognized |
| Tachometer Feedback | Yes |
| Gearmotor Voltage | 90 V DC |
| Item | DC Gearmotor |
| Thermal Protection | None |
| Rear Shaft Encoder/Pulse Generator Mounting | Yes |
| RPM Range | 0 to 15 |
| Dimension XL | 7.43 |
| Gear Type | Helical, Spur |
| Gearmotor Shaft Type | Single |
| Gearmotor Rotation | CCW, CW |
| Gearmotor Mounting Position | All Angle |
| Replacement Brushes | 6YHY3 |
| Shaft Dia. (Dimension U) | 1/2 in |
| Gearmotor Shaft Orientation | Parallel |
| Gear Case | Die Cast Aluminum |
| Shaft Length (Dimension V) | 1 in |
| Brushes | Externally Replaceable |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Max. Ambient Temp. | 40 deg C |
| Overall Length | 9.31 in |
| Overall Width | 3.63 in |
| Overall Height | 2-3/4 in |
| Input Horsepower | 1/40 hp |
| Operating Voltage | 90 V DC |
| Overhung Load Capacity | 90 lb |
| Replaceable Motor Brushes | Yes |
| Output Shaft Length | 1 in |
| Seal Type | Lip Type, Type on Input and Output Shaft, Spring Loaded |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Keyway Depth | 3/4 in |
| Nameplate Speed | 2.6 RPM |
| Maximum Torque | 100 in-lb |
| Mounting Orientation | Any Angle |
| Full Load Current | 0.36 A |
| Maximum Ambient Temperature | 40 Degrees C |
| Bearing Type | Ball on Motor, Needle on Case Output Shaft |
| Output Shaft Diameter | 1/2 in |
| Keyway Width | 1/8 in |
| Wire Rope Length | 9.31 in |
| Length | 9.31 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |