DC Gearmotor, Shaft Orientation Parallel, Motor Enclosure Totally Enclosed Nonventilated, Operating Voltage 90V DC, Motor Type Permanent Magnet DC, Nameplate Speed 63 RPM, Maximum Torque 238 in-lb, Overhung Load Capacity 325 lb, Rotation CW/CCW, Output Shaft Height 3 in, Mounting Orientation Any Angle, Gear Ratio 28:1, Input Horsepower 1/4 hp, Output Shaft Diameter 3/4 in, Bearing Type Ball on Motor, Heavy Duty Ball and Thrust Balls on Case
| Gearmotor Type | DC Gearmotor |
|---|---|
| Shaft Orientation | Parallel |
| Enclosure | TENV |
| Voltage | 90 V DC |
| Motor Type | Permanent Magnet DC |
| Nameplate RPM | 63 RPM |
| Max. Torque | 238 in-lb |
| Overhung Load | 325 lb |
| Rotation | CW/CCW |
| Mounting | All Position |
| Gear Ratio | 28:1 |
| Input HP | 1/4 |
| Bearings | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
| Full Load Amps | 2.7 A |
| Gear Material | Hardened Steel |
| Length Less Shaft | 11-3/4 in |
| Lubrication | Oil |
| Seals | Lip Type on Input and Output Shaft |
| Standards | C-UL Recognized, UL Recognized |
| Gear Type | Helical (1st Stage), Spur (Subsequent Stages) |
| Max. Ambient Temp. | 40 deg C |
| Replacement Brushes | 6YHY9 |
| Gearmotor Shaft Orientation | Parallel |
| Item | DC Gearmotor |
| Gearmotor Mounting Position | All Angle |
| Gearmotor Shaft Type | Single |
| Brushes | Externally Replaceable |
| Gear Case | Die Cast Aluminum |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| RPM Range | 51 to 75 |
| Gearmotor Voltage | 90 V DC |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Gearmotor Rotation | CCW, CW |
| Tachometer Feedback | No |
| Shaft Length (Dimension V) | 1-1/2 in |
| Shaft Dia. (Dimension U) | 3/4 in |
| Thermal Protection | None |
| Overall Length | 13-1/4 in |
| Overall Width | 8.13 in |
| Overall Height | 6.63 in |
| Bearing Type | Ball on Motor, Heavy Duty Ball and Thrust Balls on Case |
| Keyway Width | 1/8 in |
| Operating Voltage | 90 V DC |
| Seal Type | Lip Type, Type on Input and Output Shaft |
| Output Shaft Height | 3 in |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Keyway Depth | 3/16 in |
| Full Load Current | 2.7 A |
| Maximum Torque | 238 in-lb |
| Mounting Orientation | Any Angle |
| Replaceable Motor Brushes | Yes |
| Maximum Ambient Temperature | 40 Degrees C |
| Overhung Load Capacity | 325 lb |
| Output Shaft Length | 1-1/2 in |
| Input Horsepower | 1/4 hp |
| Output Shaft Diameter | 3/4 in |
| Nameplate Speed | 63 RPM |
| Mount Hole Center-to-Center Length | 2-1/2 in |
| Mount Hole Center-to-Center Width | 7.13 in |
| Wire Rope Length | 13-1/4 in |
| Length | 13-1/4 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |