Bomba trituradora, HP 5 hp, Voltaje nominal 240V CA, Hz 60, Fase - Bombas 3, Amperes 20.68 A, Tipo de motor trifásico, Material del cuerpo hierro fundido, Material del impulsor latón, Material del sello del eje - Bombas cerámica, carburo de silicio, acero inoxidable, Accionamiento del interruptor sin interruptor incluido, Conexión eléctrica del interruptor sin interruptor incluido, Caudal a 10 pies de carga 99 gpm, Caudal a 15 pies de carga 99 gpm, Caudal a 20 pies de carga 99 gpm, Caudal a 40 pies de carga 99 gpm, Caudal a 60 pies de carga 98 gpm
| HP | 5 HP |
|---|---|
| Phase - Pumps | 3 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Base Material | Cast Iron |
| Flow Rate @ 10 Ft. of Head | 99 gpm |
| Max. Head | 130 ft |
| Impeller Material | Brass |
| Min. Sump Pit Dia. | 24 in |
| Cord Length - Pumps | 20 ft |
| Item | Grinder Pump |
| GPM of Water @ 25 Ft. of Head | 99 |
| Amps | 20.68 |
| GPM of Water @ 10 Ft. of Head | 99 |
| Voltage | 230V |
| GPM of Water @ 45 Ft. of Head | 46 |
| Height | 30-1/4 in |
| GPM of Water @ 5 Ft. of Head | 99 |
| GPM of Water @ 70 Ft. of Head | 96 |
| GPM of Water @ 110 Ft. of Head | 45 |
| Motor RPM | 3,450 |
| Thermal Protection | No |
| Input Phase AC | 3 |
| Motor Type | 3-Phase |
| Cord Length | 20 ft |
| Agency Compliance | CUS |
| Duty | Continous |
| GPM of Water @ 20 Ft. of Head | 99 |
| Length | 30-1/4 in |
| GPM of Water @ 60 Ft. of Head | 98 |
| GPM of Water @ 50 Ft. of Head | 99 |
| Impeller Material - Pumps | Brass |
| GPM of Water @ 35 Ft. of Head | 89 |
| Max. Head - Pumps | 130 ft |
| Max. Liquid Temp. | 140 deg F |
| GPM of Water @ 80 Ft. of Head | 90 |
| Hz | 60 |
| GPM of Water @ 100 Ft. of Head | 65 |
| GPM of Water @ 40 Ft. of Head | 99 |
| GPM of Water @ 55 Ft. of Head | 7 |
| Handle | No |
| Bearing Type | Ball |
| GPM of Water @ 30 Ft. of Head | 99 |
| Discharge NPT | 2-1/2" Flanged |
| Voltage - Pumps | 240V AC |
| Housing Material | Cast Iron |
| Pump Body Material | Cast Iron |
| Phase | Three |
| Shaft Seal Material - Pumps | Ceramic, Silicon Carbide, Stainless Steel |
| Max. Dia. Solids | 1/2 in |
| Shaft Seal | Ceramic, Silicon Carbide, SS |
| GPM of Water @ 15 Ft. of Head | 99 |
| GPM of Water @ 120 Ft. of Head | 30 |
| GPM of Water @ 90 Ft. of Head | 79 |
| Max. Diameter Solids | 1/2 in |
| Manufacturers Warranty Length | 1 yr |
| Diameter | 11 in |
| Pump RPM | 3,450 |
| Item - Grinder Pumps | Grinder Pump |
| Discharge | 2-1/2 in (Flanged) |
| Duty Cycle | Continuous |
| Switch Electrical Connection | No Switch Included |
| Flow Rate @ 40 Ft. of Head | 99 gpm |
| Overall Height | 30-1/4 in |
| Discharge Dia. | 2-1/2 in |
| Discharge Standard | Flanged |
| Body Dia. | 11 in |
| Flow Rate @ 60 Ft. of Head | 98 gpm |
| Rated Voltage | 240 V AC |
| Flow Rate @ 20 Ft. of Head | 99 gpm |
| Flow Rate @ 15 Ft. of Head | 99 gpm |
| Overall Length | 30-1/4 in |
| RPM | 3,450 |
| Standards | CUS |
| Discharge Diameter | 2-1/2 in |
| Rotation Speed - Maximum | 3,450 rpm |
| Body Diameter | 11 in |
| Liquid Temperature - Maximum | 140 deg F |
| Current | 20.68 A |
| Frequency | 60 Hz |
| Horsepower | 5 |
| Solids Diameter - Maximum | 1/2 in |
| Shaft Seal Material | Carbide, Ceramic /Stainless Steel, Silicon |
| Sump Pit Diameter - Minimum | 24 in |
| Feet of Head - Maximum | 130 ft |
| Flow Rate @ 10 ft of Head | 99 gpm |
| Discharge Gender | Not Applicable |
| Wire Rope Length | 30-1/4 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |