HVAC Motor, Single Phase, Motor Design Shaded Pole, 1/100 hp HP, Nameplate RPM 1,550 RPM, No. of Speeds 1, Voltage 115V AC, 0.7 A Full Load Amps, 3.3 Frame, Output Watts 7.4 W, 60 Hz Hz, Usable @ 208V Not Usable at 208V, Usable @ 200V Not Usable at 200V, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Duty Cycle Continuous, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CCWSE, Motor Enclosure Design Totally Enclosed Air-Over, Motor Mounting Type Stud
| Voltage | 115V AC |
|---|---|
| Nameplate RPM | 1,550 |
| Motor Enclosure Design | Totally Enclosed Air-Over |
| Number of Speeds | 1 |
| HP | 1/100 |
| RPM Range | 1,501-1,600 |
| No. of Speeds | 1 |
| Mounting Stud Location | 4/Opposite Shaft End |
| Motor Design | Shaded Pole |
| Motor Mounting Type | Ring/Stud |
| Motor Service Factor | 1 |
| Application | OEM and Replacement Use In A Wide Variety of Fan and Blower |
| Cord Length | 12 in |
| Duty | Continuous |
| Body Dia. | 3-5/16 in |
| Mounting Pattern | 2 x 2 |
| Stud/Base Mtg. Pattern | 2 in x 2 in |
| Motor Bearings | Sleeve |
| Length Less Shaft | 2-5/8 in |
| Item | HVAC Motor |
| Ins. Class | B |
| Voltage Compatibility | 115V AC, 208V AC to 230V AC, 115V AC, 230V AC, 115V AC, 120V AC, 240V AC, 120V AC |
| Phase | Single |
| Motor Thermal Protection | Auto |
| Motor Sub Application | Direct Drive Fan/Blower |
| Number of Shafts | 1 |
| Motor Application | HVAC, R |
| Frame | 3-3/10 |
| Motor Shaft Rotation | CCWSE |
| Motor Shaft Design | Flat |
| Shaft Dia. | 5/16 in |
| Full Load Amps | 0.7 A |
| Shaft Length | 2-1/4 in |
| Max. Ambient Temp. | 40 Degrees C |
| Hz | 60 Hz |
| Capacitor Required | Capacitor |
| Motor Mounting Position | All Angle |
| Mounting Stud Pattern | 2 in x 2 in |
| Usable @ 208V | Not Usable at 208V |
| Usable @ 200V | Not Usable at 200V |
| Duty Cycle | Continuous |
| Mounting | Stud |
| Type | OEM Replacement |
| Nameplate Service Factor @ 60 Hz | 1 |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Overall Length | 4-3/4 in |
| Drive Type | Direct Drive |
| Shaft Design | Flat |
| Body Diameter | 3.3 in |
| Wattage | 7.4 W |
| Frequency | 60 Hz |
| Frame Material | Steel |
| Insulation Class | B |
| Shaft Diameter | 5/16 in |
| Bearing Type | Sleeve |
| Full Load Current @ 60 Hz | 0.7 A |
| Ambient Temperature - Maximum | 40 Degrees C |
| Frame Size | 3.3 |
| Sub Application | General Purpose |
| Motor Enclosure Type | Totally Enclosed Air-Over |
| Wire Rope Length | 4-3/4 in |
| Length | 4-3/4 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |