Jet Pump Motor, Body Dia. 5.6 in, CC Number CC030A, Conduit Box Location Exterior, Conduit Box Position Not Applicable, Diaphragm Type Not Applicable, Duty Cycle Continuous, Finish Gray, Frame 56J, Hz 60 Hz, Full Load Amps 13.4/6.7, Height 12 7/16 in, HP 1, Includes Dripcover Kit for Vertical Mounting, Water Slinger, Ins. Class B, Inverter Rated Not Applicable, Lead Length 8 1/2 in, Length Less Shaft 9 7/8 in, Max. Ambient Temp. 40 Degrees C, Motor Application Pump, Motor Bearings Ball
| Voltage | 115V AC, 230V AC |
|---|---|
| Frame | 56J |
| HP | 1 |
| Motor Mounting Type | Face |
| Hz | 60 Hz |
| Body Dia. | 5.6 in |
| Motor Design | Capacitor-Start |
| Nameplate RPM | 3,450 |
| Phase | Single |
| Includes | Dripcover Kit for Vertical Mounting, Water Slinger |
| Motor Sub Application | Jet Pump |
| Max. Ambient Temp. | 40 deg C |
| Nominal Efficiency | 68.7% |
| Motor Thermal Protection | Auto |
| Motor Bearings | Ball |
| Shaft Length | 2-5/8 in |
| Standards | CSA Certified (258501), UL Recognized (E37403) |
| RPM Range | 3,001 to 3,600 |
| Motor Shaft Design | Threaded |
| Full Load Amps | 13.4/6.7 A |
| Motor Enclosure Design | Open Dripproof |
| Motor Service Factor | 1.4 |
| Voltage Compatibility | 115V AC, 200V AC to 230V AC, 115V AC, 208V AC to 230V AC, 115V AC, 230V AC, 115V AC, 120V AC, 240V AC, 230V AC, 240V AC |
| Motor Shaft Rotation | CCWSE |
| Ins. Class | B |
| Motor Mounting Position | Horizontal, Vertical Shaft Down |
| Item | Jet Pump Motor |
| Shaft Dia. | 5/8 in |
| Motor Application | Pump |
| Finish | Gray |
| Shaft Type | Threaded |
| Shaft Dia. (In.) | 5/8 |
| Conduit Box Location | Exterior |
| Insulation Class | B |
| Requires Overload Relay | No |
| Conduit Box Position | Not Applicable |
| Resilient Ring Diameter | Not Applicable |
| Shaft Material | Stainless Steel |
| Number of Wires | 11 |
| Variable Torque Rating | Not Applicable |
| Height | 12-7/16 in |
| Nameplate RPM @ 50 Hz | No Applicable |
| Frame Finish | Powder-Coated |
| NEMA Design Class | B |
| Overall Length | 12-7/16 in |
| Ring-to-Ring Center | Not Applicable |
| Stator Type | Not Applicable |
| Number of Speeds | 1 |
| Service Factor Current | 18.0 A / 9.0 A |
| Length Less Shaft | 9-7/8 in |
| Product Type | Pump Motor |
| Motor Enclosure Type | Open Drip Proof |
| Ambient Temperature - Maximum | 40 deg C |
| Frame Material | Stainless Steel |
| Manufacturers Warranty | 1 yr |
| Weight | 20 lb |
| Full Load Current @ 50 Hz | Not Applicable |
| Body Diameter | 5.6 in |
| Constant Torque Rating | Not Applicable |
| Nameplate Horsepower @ 50 Hz | Not Applicable |
| Nameplate Service Factor @ 50 Hz | Not Applicable |
| Series | M |
| Diaphragm Type | Not Applicable |
| Lead Length | 8-1/2 in |
| Duty Cycle | Continuous |
| Includes Diaphragm | Diaphragm Not Included |
| Inverter Rated | Not Applicable |
| Starting Method | Across-the-Line |
| Frequency | 60 Hz |
| Thrust Rating | Not Applicable |
| Mounting Position | Horizontal |
| Bolt Circle Diameter | 5-7/8 in |
| Full Load Current @ 60 Hz | 13.4/6.7 A |
| Efficiency Rating | Standard Efficiency |
| Nameplate Service Factor @ 60 Hz | 1.4 |
| Shaft Diameter | 5/8 in |
| Shaft Design | Threaded |
| Frame Size | 56J |
| Application | Pump |
| Bearing Type | Ball |
| Sub Application | Jet Pump |
| Wire Rope Length | 12-7/16 in |
| Length | 12-7/16 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |