Fan and Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1 hp HP, Nameplate RPM 1,140 RPM, No. of Speeds 1, Voltage 115/230V AC, 11.4/5.7 A Full Load Amps, 48Z Frame, 60 Hz Hz, Usable @ 208V Not Usable at 208V, Usable @ 200V Not Usable at 200V, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Duty Cycle Continuous, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air Over, Motor Mounting Type Stud
| Hz | 60 |
|---|---|
| Motor Service Factor | 1 |
| Motor Bearings | Ball |
| Ins. Class | B |
| Item | Fan and Blower Motor |
| Body Dia. | 5-11/16 in |
| Shaft Length | 3 in |
| Shaft Dia. | 5/8 in |
| Motor Mounting Type | Ring/Stud |
| Standards | CSA Certified, UL Recognized |
| Voltage | 115V AC, 230V AC |
| Motor Shaft Rotation | CCW, CW |
| RPM Range | 1,101-1,200 |
| Motor Enclosure Design | Open Air-Over |
| Phase | Single |
| Motor Thermal Protection | Auto |
| Capacitor Required | Capacitor Included |
| Motor Application | HVAC, R |
| Motor Design | Permanent Split Capacitor |
| HP | 1 |
| Nameplate RPM | 1,140 |
| Length Less Shaft | 9-9/16 in |
| Motor Shaft Design | Flat |
| Duty | Continuous |
| Application | Fan/Blower |
| No. of Speeds | 1 |
| Mounting Stud Location | 4/Opposite Shaft End |
| Voltage Compatibility | 115V AC, 200V AC to 230V AC, 115V AC, 208V AC to 230V AC, 115V AC, 230V AC, 115V AC, 120V AC, 240V AC, 230V AC, 240V AC |
| Motor Mounting Position | All Angle |
| Full Load Amps | 11.4/5.7 A |
| Frame | 48 Z |
| Motor Sub Application | Direct Drive |
| Stud Size | #10-32 |
| Mounting Stud Pattern | 3 5/8 in |
| Bolt Circle Dia. | 5-1/8 in |
| Max. Ambient Temp. | 40 deg C |
| Usable @ 200V | Not Usable at 200V |
| Number of Shafts | 1 |
| Includes | Capacitor |
| Duty Cycle | Continuous |
| Mounting Holes | (4) #10-32 |
| Stud Quantity | 4 |
| Usable @ 208V | Not Usable at 208V |
| Conduit Box Position | F3 |
| Mounting | Stud |
| Number of Speeds | 1 |
| Mounting Position | All Angle |
| Overall Length | 12-5/8 in |
| Insulation Class | B |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Shaft Design | Flat |
| Bolt Circle Diameter | 5-1/8 in |
| Nameplate Service Factor @ 60 Hz | 1 |
| Sub Application | Ventilator |
| Body Diameter | 5.7 in |
| Frame Size | 48 Z |
| Full Load Current @ 60 Hz | 11.4/5.7 A |
| Bearing Type | Ball |
| Mounting Stud Thread Size | #10 to 32 |
| Drive Type | Direct Drive |
| Frame Material | Steel |
| Shaft Diameter | 5/8 in |
| Frequency | 60 Hz |
| Product Type | Blower Motor, Fan |
| Ambient Temperature - Maximum | 40 deg C |
| Stack Size | Not Applicable |
| Motor Enclosure Type | Open Air Over |
| Wire Rope Length | 12-5/8 in |
| Length | 12-5/8 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |