Fan and Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 3/4 hp HP, Nameplate RPM 1,075 RPM, No. of Speeds 4, Voltage 208-230V AC, 6.1-5.8 A Full Load Amps, 48YZ Frame, 60 Hz Hz, Motor Service Factor 1, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Shaft Length 6 in, Shaft Dia. 1/2 in
| Motor Shaft Rotation | CCW, CW |
|---|---|
| Max. Ambient Temp. | 40 deg C |
| Motor Service Factor | 1 |
| Motor Enclosure Design | Open Air-Over |
| Hz | 60 |
| Ins. Class | B |
| Motor Sub Application | Direct Drive |
| Application | Blowers, Fans and Air Circulators |
| Length Less Shaft | 6-15/16 in |
| Voltage Compatibility | 115V AC, 208V AC to 230V AC, 200V AC to 230V AC, 208V AC to 220V AC, 440V AC, 208V AC to 230V AC, 277V AC, 208V AC to 230V AC, 440V AC, 208V AC to 230V AC, 460V AC, 208V AC to 230V AC, 208V AC to 240V AC |
| Overall Length | 12-15/16 in |
| Phase | Single |
| Nameplate RPM | 1,075 |
| Shaft Dia. | 1/2 in |
| Frame | 48YZ |
| Motor Thermal Protection | Auto |
| Ring to Ring Center | 6-1/2 in |
| Motor Mounting Position | All Angle |
| Motor Mounting Type | Ring/Stud |
| HP | 3/4 |
| Motor Design | Permanent Split Capacitor |
| No. of Speeds | 4 |
| Voltage | 208V AC to 230V AC |
| Motor Bearings | Sleeve |
| Full Load Amps | 6.1-5.8 A |
| Shaft Length | 6 in |
| Body Dia. | 5-5/8 in |
| Item | Fan and Blower Motor |
| Capacitor Required | Capacitor Not Included |
| Motor Application | HVAC, R |
| RPM Range | 1,001-1,100 |
| Duty | Continuous |
| Motor Shaft Design | Flat |
| Mounting | Stud |
| Number of Speeds | 4 |
| Shaft Design | Flat |
| Mounting Position | All Angle |
| Frame Size | 48YZ |
| Ambient Temperature - Maximum | 40 deg C |
| Insulation Class | B |
| Full Load Current @ 60 Hz | 6.1-5.8 A |
| Motor Enclosure Type | Open Air Over |
| Shaft Diameter | 1/2 in |
| Bearing Type | Sleeve |
| Drive Type | Direct Drive |
| Frequency | 60 Hz |
| Product Type | Blower Motor, Fan |
| Sub Application | General Purpose |
| Nameplate Voltage @ 50 Hz | Not Applicable |
| Body Diameter | 5.6 in |
| Stack Size | Not Applicable |
| Nameplate Service Factor @ 60 Hz | 1 |
| Wire Rope Length | 12-15/16 in |
| Length | 12-15/16 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |