Interruptor de flotador
El interruptor de flotador mecánico Dayton NO opera a 115/230 VAC y soporta 15 psi. Es un componente de la categoría de interruptores de flotador, diseñado para aplicaciones de control de nivel. Su modelo es 10A174.
| Voltage | 115V AC, 230V AC |
|---|---|
| Max. Pressure | 15 psi |
| Item | Float Switch |
| Amps | 15 |
| Type | Tether |
| HP @ 1 Phase - 115V | 2 hp |
| Max. Pressure (PSI) | 15 |
| Teather/Solid State | Tether |
| Float Switch On Point | 45 Degrees Above Horizontal |
| Max. Liquid Temp. | 140 deg F |
| Body Material | ABS |
| Wire Lead | SJOOW |
| Compliance | UL 508 |
| Float Switch Type | Tether |
| Float Length (In.) | 4-5/8 |
| HP @ 1 Phase - 230V | 2 hp |
| VA Rating | 3,600 |
| Connection | Stripped |
| Control Range | Adjustable |
| Electrical Connection - Pumps | Wire Leads |
| Float Material | ABS |
| Float Switch Off Point | 45 Degrees Below Horizontal |
| Max. Wattage | 3,600 |
| Electrical Connection (Pumps) | Wire Leads |
| Agency Compliance | CSA, UL |
| Pumping Range Min./Max. | 7 to 28 |
| Float Switch Cord Length | 20 ft |
| Float Switch Float Material | ABS |
| Float Dia. (In.) | 2-11/16 |
| Tether Length Min.-Max. | 3" to 18" |
| Wire Gauge | 14 |
| Float Switch Contact Form | Normally Open |
| Turns Off At | 45 Deg Below |
| Float Dia. | 2-5/8 in |
| Includes | UL CSA |
| Contact Form | Normally Open |
| Float Length | 4-5/8 in |
| Standards | CSA, UL Listed |
| Rated Voltage | 115/230V AC |
| Minimum Tether Length | 3 in |
| Electrical Connection | Wire Leads |
| Switch Actuation | Mechanically Activated |
| Cord Length | 20 ft |
| Maximum Tether Length | 18 in |
| Off Point | 45 Degrees Below Horizontal |
| On Point | 45 Degrees Above Horizontal |
| Contact Default | Normally Open |
| Liquid Temperature - Maximum | 140 deg F |
| Tether Length - Maximum | 18 in |
| Float Diameter | 2-5/8 in |
| Tether Length - Minimum | 3 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |