Pillow Block Bearing, Base Height 0.14 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 in, Bore Type Cylindrical, Center Height 1 1/2 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Steel, Lubricant Material NLGI #2 Equivalent, Maximum Speed 3,500 RPM, Maximum Temperature 200 Degrees F, Minimum Temperature -30 Degrees F, Mount Hole Center-to-Center Length 4 in, Mount Type Bolt-Through, Number of Mount Holes 2, Overall Height 2.875 in
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Set Screw |
| Housing Material | Steel |
| Bearing Material | 52100 Chrome Steel |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Alloy Steel |
| Bore Diameter | 1 in |
| Series | PBPH-BL-Series |
| Closure | Double Sealed |
| Center Height | 1-1/2 in |
| Mount Hole Center-to-Center Length | 4 in |
| Overall Length | 5.187 in |
| Overall Width | 1-7/8 in |
| Overall Height | 2-7/8 in |
| Dimension B | 2-7/8 in |
| Dimension A | 1-1/2 in |
| Temp. Range | -30 to 200 deg F |
| Dimension L | 1-7/8 in |
| Finish | Rustproof Plated |
| Dimension G | 1-7/8 in |
| Dimension J | 1/2 in |
| Includes | (2) Set Screws, Rubber Liner |
| Dimension F | 9/64 in |
| Dimension C | 5 3/16 in |
| Dimension E | 4 in |
| Dimension H | 9/64 in |
| Dimension D | 5-3/16 in |
| Dynamic Radial Load Capacity | 1,768 lbf |
| Maximum Misalignment Angle | 2 deg |
| Minimum Temperature | -30 deg F |
| Bore Type | Cylindrical |
| Bore Diameter Tolerance | -0.000/+0.003 in |
| Features | Pre-Lubricated and Made to ABEC-1 Tolerance, Encased in an Extra Thick, Non-Conductive Oil Resistant Rubber Liner Which Corrects up to a 2 Degrees Misalignment While Reducing Vibration and Noise, Rust-Proof Plated Finish, Neoprene Seal Keeps Contaminants Out Allowing for Usage in Wet or Dry Conditions, Wide Inner Race Locks Securely to the Shaft with Two Set Screws |
| Mount Type | Bolt-Through |
| Lubricant Material | NLGI #2 Equivalent |
| Number of Mount Holes | 2 |
| Resistance Properties | Corrosion-Resistant |
| Static Radial Load Capacity | 3,153 lbf |
| Seal Material | Rubber |
| Base Height | 0.14 in |
| Bearing Material Grade | AISI 52100 |
| Maximum Temperature | 200 deg F |
| Maximum Speed | 3,500 rpm |
| Mounting Bolt Size | 1/2 in |
| Wire Rope Length | 5.187 in |
| Expansion Type | Fixed |
| Split Housing | Not Split |
| Maximum PV | Not Applicable |
| Bearing Lubrication | Maintenance-Free |
| Length | 5.187 in |
| Fits Chest Size | Pre-Lubricated and Made to ABEC-1 Tolerance, Encased in an Extra Thick, Non-Conductive Oil Resistant Rubber Liner Which Corrects up to a 2 Degrees Misalignment While Reducing Vibration and Noise, Rust-Proof Plated Finish, Neoprene Seal Keeps Contaminants Out Allowing for Usage in Wet or Dry Conditions, Wide Inner Race Locks Securely to the Shaft with Two Set Screws |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |