Pillow Block Bearing, Base Height 0.44 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 3/4 in, Bore Type Cylindrical, Center Height 1 1/8 in, Closure Double Sealed, Expansion Type Fixed, Housing Material Zinc Die Cast, Lubricant Material NLGI #2 Equivalent, Maximum Speed 4,500 RPM, Maximum Temperature 200 Degrees F, Minimum Temperature -30 Degrees F, Mount Hole Center-to-Center Length 3 3/8 in, Mount Type Bolt-Through, Number of Mount Holes 2
| System of Measurement | Inch |
|---|---|
| Item | Pillow Block Bearing |
| Shaft Locking Type | Set Screw |
| Housing Material | Zinc Die Cast |
| Bearing Material | 52100 Chrome Steel |
| Bearing Insert Type | Ball |
| Bearing Insert Material | Alloy Steel |
| Bore Diameter | 3/4 in |
| Series | PBDC-BL-Series |
| Closure | Double Sealed |
| Center Height | 1-1/8 in |
| Mount Hole Center-to-Center Length | 3-3/8 in |
| Overall Length | 4-1/4 in |
| Overall Width | 1.312 in |
| Overall Height | 2.312 in |
| Dimension F | 7/16 in |
| Dimension H | 7/16 in |
| Dimension L | 1-5/16 in |
| Dimension J | 3/8 in |
| Includes | (2) Set Screws |
| Dimension G | 1-5/16 in |
| Dimension E | 3-3/8 in |
| Dimension B | 2-5/16 in |
| Dimension A | 1-1/8 in |
| Finish | Zinc Plated |
| Dimension C | 4 1/4 in |
| Dimension D | 4-1/4 in |
| Temp. Range | -30 to 200 deg F |
| Seal Material | Buna-N |
| Maximum Temperature | 200 deg F |
| Lubricant Material | NLGI #2 Equivalent |
| Bore Type | Cylindrical |
| Mount Type | Bolt-Through |
| Number of Mount Holes | 2 |
| Mounting Bolt Size | 3/8 in |
| Maximum Speed | 4,500 rpm |
| Resistance Properties | Corrosion-Resistant |
| Dynamic Radial Load Capacity | 1,479 lbf |
| Features | Pre-Lubricated and Made to ABEC-1 Tolerance, Housing Retains Bearing Securely by Pressing the Lip 360 Degrees Over the Outer Race, Ideal for Applications Requiring Strong Load Support in Limited Mounting Areas, Neoprene Seal Keeps Contaminants Out Allowing for Usage in Wet or Dry Conditions, Solid Zinc Die Cast Housing is Non-Corrosive and Lightweight, Wide Inner Race Locks Securely to the Shaft with Two Set Screws |
| Bearing Material Grade | AISI 52100 |
| Minimum Temperature | -30 deg F |
| Static Radial Load Capacity | 2,877 lbf |
| Base Height | 0.44 in |
| Wire Rope Length | 4-1/4 in |
| Expansion Type | Fixed |
| Split Housing | Not Split |
| Bearing Lubrication | Maintenance-Free |
| Maximum PV | Not Applicable |
| Length | 4-1/4 in |
| Fits Chest Size | Pre-Lubricated and Made to ABEC-1 Tolerance, Housing Retains Bearing Securely by Pressing the Lip 360 Degrees Over the Outer Race, Ideal for Applications Requiring Strong Load Support in Limited Mounting Areas, Neoprene Seal Keeps Contaminants Out Allowing for Usage in Wet or Dry Conditions, Solid Zinc Die Cast Housing is Non-Corrosive and Lightweight, Wide Inner Race Locks Securely to the Shaft with Two Set Screws |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |