Bomba centrífuga, material de la carcasa de la bomba aleación de zinc, potencia 1/90 hp, voltaje de placa 115V AC, caudal a 1 ft de altura (máximo) 380 gph, caudal a 5 ft de altura (máximo) 248 gph, altura máxima 7.8 ft, tamaño de tubería de admisión compatible 1/2 in, tamaño de tubería de descarga compatible 1/4 in, tipo de admisión con malla, tipo de descarga NPT, longitud del cable 6 ft, sellado del motor lleno de aceite, amperaje 1.4 A, compatible con tipo de medio aceite, ciclo de trabajo continuo, tipo de conexión eléctrica enchufable, características lleno de aceite
| Item | Centrifugal Pump |
|---|---|
| HP | 1/90 hp |
| Voltage | 115V |
| Full Load Amps | 1.4 |
| Cord Length | 6 ft |
| Impeller Material | Polyamide |
| Duty | Continuous |
| Seal Material | Nitrile |
| Length | 4.8 in |
| Port Rotation | Yes |
| Housing Material | POM |
| Outlet | 1/4 in NPT |
| Inlet Type | 1/2 in NPT/Screen |
| GPH of Water @ 5 Ft. of Head | 242 |
| Inlet | 1/2 in NPT/Screen |
| Includes | Filter, Strainer |
| GPH of Water @ 1 Ft. of Head | 380 |
| Overload Protection | Automatic |
| Agency Compliance | CSA CUS |
| Motor Type | Shaded Pole |
| Height | 4-3/4 in |
| Features | Not Applicable |
| Width | 4-7/8 in |
| Motor RPM | 3,400 RPM |
| Cord Type | 3-Conductor SJTOW, Resists Water and Oil |
| Hz | 60 Hz |
| Amps | 1.4 |
| Overall Length | 4.8 in |
| Duty Cycle | Continuous |
| Frequency | 60 Hz |
| Compatible Discharge Pipe Size | 1/4 in |
| Compatible Intake Pipe Size | 1/2 in |
| Maximum RPM | 3,400 rpm |
| Nameplate Voltage | 115V AC |
| Seal Type | Oil Seal |
| Pumping Application | Condensate Removal, Decorative Water, Evaporative Cooling, Coolant Recirculating, Vaporizers |
| Compatible with Media Type | Oil |
| Horsepower | 1/90 hp |
| Overall Height | 4.8 in |
| Overall Width | 4.9 in |
| Pump Housing Material | Zinc Alloy |
| Maximum Feet of Head | 7.8 ft |
| Thermal Overload Protection | Yes |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Intake Type | Screened |
| Motor Sealing | Oil-Filled |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 5 ft of Head (Maximum) | 248 gph |
| Electrical Connection Type | Plug-In |
| Flow Rate @ 1 ft of Head (Maximum) | 380 gph |
| Discharge Type | NPT |
| Standards | cCSAus Certified |
| Series | Not Applicable |
| Suction Lift (Maximum) | Not Applicable |
| Inlet Diameter | 1/2 in |
| Feet of Head (Minimum) | Not Applicable |
| Phase | Single |
| Priming | Not Applicable |
| Inlet Standard | Screened |
| Media Temperature - Maximum | Not Applicable |
| Ambient Temperature - Maximum | Not Applicable |
| Number of Stages | 1 |
| Media Temperature - Minimum | Not Applicable |
| Shaft Seal Material | Buna-N |
| Drive Coupling Type | No Coupling |
| Wetted Material | Not Applicable |
| Feet of Head (Maximum) | 7.8 ft |
| Ambient Temperature - Minimum | Not Applicable |
| Manufacturer Warranty Length | 1 yr |
| Shut Off Pressure - Maximum | Not Applicable |
| Full Load Current | 1.4 A |
| Flow Rate (Maximum) | 380 gph |
| Flow Rate (Minimum) | Not Applicable |
| Chemical Compatibility | Oil |
| Discharge Diameter | 1/4 in |
| Wire Rope Length | 4.8 in |
| Fits Chest Size | Not Applicable |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |