Booster Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 3/4 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 20 psi 52 gpm, Flow Rate @ 30 psi 19 gpm, Shut Off Pressure (Maximum) 33 psi, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/4 in, Intake Type NPT, Mounting Orientation Horizontal, For Use With Potable Systems No, Amps 11.1/5.5 A, Best Efficiency Pressure 25 psi, Case Pressure (Maximum) 100 psi
| Booster Pump Type | Booster Pump |
|---|---|
| Item | Booster Pump |
| HP - Pumps | 3/4 hp |
| Voltage - Pumps | 120V AC, 240V AC |
| Phase - Pumps | 1 |
| Inlet Size - Pumps | 1-1/2 in NPT |
| Outlet Size - Pumps | 1-1/4 in NPT |
| Number of Stages - Pumps | 1 |
| Max. Pressure - Pumps | 33 psi |
| Housing Material - Pumps | Cast Iron |
| Motor Enclosure - Pumps | Open Dripproof |
| Length | 16 in |
| Motor Ambient Temp. Rating | 65 Degrees C |
| Type | Booster |
| Seal Material | Buna-N/Carbon/Silicone Carbide/Stainless Steel |
| Stages | 1 |
| Bearing Type | Double Sealed |
| Max. PSI Boost @ 20 GPM | 30 |
| Hz | 60 Hz |
| Max. PSI Boost @ 30 GPM | 28 |
| Outlet | 1-1/4" |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| GPM @ 25 PSI | 37 |
| Includes | Manual |
| Frame | 56J |
| Best Efficiency GPM @ PSI | 47 @ 25 |
| Max. PSI Boost @ 2-10 GPM | 32 |
| Max. Pressure | 33 psi |
| Duty | Continuous |
| GPM @ 20 PSI | 52 |
| Inlet | 1-1/2 in |
| Motor Type | Capacitor-Start, Run |
| Housing Material | Cast iron |
| Motor Enclosure | Open Dripproof |
| Agency Compliance | c UL us |
| Phase | Single |
| Height | 8-3/4 in |
| GPM @ 15 PSI | 60 |
| Inlet (In.) | 1-1/2 |
| Wetted Materials | Ceramic, Carbon, Cast Iron, Buna N, Stainless Steel |
| Impeller Type | Closed |
| Max. Case Pressure | 100 psi |
| Amps | 11.1/5.5 A |
| Impeller Material | Stainless Steel |
| Voltage | 230V, 115V |
| GPM @ 30 PSI | 19 |
| Width | 6-1/2 in |
| HP | 3/4 |
| Motor RPM | 3450 |
| Manufacturers Warranty Length | 1 yr |
| Overall Width | 6-1/2 in |
| Application | Not Applicable |
| Overall Length | 16 in |
| Overall Height | 8-3/4 in |
| Standards | cULus Listed |
| Compatible Intake Pipe Size | 1-1/2 in |
| Impeller Design | Closed |
| Horsepower | 0.75 |
| For Use With Potable Systems | No |
| Intake Size | 1-1/2 in |
| Wetted Material | Ceramic, Cast Iron, Carbon, Buna-N, Stainless Steel |
| Manufacturer Warranty Length | 1 yr |
| Number of Stages | 1 |
| Suction Lift (Maximum) | 25 ft |
| Motor Frame Designation | 56J NEMA |
| Nameplate Voltage | 115/230V AC |
| Mounting Orientation | Horizontal |
| Best Efficiency Pressure | 25 psi |
| Compatible with Media Type | Water |
| Flow Rate @ 20 psi | 52 gpm |
| Shut Off Pressure (Maximum) | 33 psi |
| Case Pressure (Maximum) | 100 psi |
| Frequency | 60 Hz |
| Duty Cycle | Continuous |
| Priming | Manual |
| Compatible Discharge Pipe Size | 1-1/4 in |
| Maximum Media Temperature | 200 deg F |
| Pressure Boost (Maximum) | 32 psi |
| Flow Rate @ 30 psi | 19 gpm |
| Flow Rate @ 15 psi | 60 gpm |
| Maximum RPM | 3,450 rpm |
| Intake Type | NPT |
| Discharge Rotation | 90 Degrees |
| Motor Ambient Temperature (Maximum) | 149 deg F |
| Pump Housing Material | Cast Iron |
| Discharge Type | NPT |
| Pumping Application | General Service in Farm, Liquid Transfer, Pressure Boosting, Water Supply |
| Motor Ambient Temperature (Minimum) | 65 deg F |
| Power Source | Corded Electric |
| Installation | Floor Standing |
| Solids Diameter - Maximum | 0.05 in |
| Motor Ambient Temperature - Minimum | 65 deg F |
| Inlet Gender | Female |
| ANSI Flange Class | Not Applicable |
| Motor Ambient Temperature - Maximum | 149 deg F |
| Case Pressure - Maximum | 100 psi |
| Media Temperature - Maximum | 200 deg F |
| Cord Length | Not Applicable |
| NSF Certifications for Food and Drinking Water | Not Applicable |
| Pressure Boost - Maximum | 32 psi |
| Discharge Gender | Not Applicable |
| Pump Technology | Not Applicable |
| Shut Off Pressure - Maximum | 33 psi |
| Revolutions Per Minute - Maximum | 3,450 rpm |
| Motor Enclosure Design | Open Drip Proof |
| Media Temperature - Minimum | 0 deg F |
| For Media Type | Not Applicable |
| Pump Casing Material | Cast Iron |
| Series | Not Applicable |
| Full Load Current | 11.1/5.5 A |
| Inlet Standard | NPT |
| Inlet Diameter | 1-1/2 in |
| Best Efficiency Flow | 37 gpm |
| Connectivity | Not Applicable |
| Suction Lift - Maximum | 25 ft |
| Discharge Diameter | Not Applicable |
| Discharge Standard | NPT |
| Motor Design | Capacitor-Start, Run |
| Feet of Head - Maximum | 76 ft |
| Flow Rate - Maximum | 60 gpm |
| Power Source - TS Only | Corded Electric |
| Wire Rope Length | 16 in |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |