Rigid Shaft Coupling, Bore Diameter 1 7/8 in, Bore Diameter 2 7/8 in, Bore Type Round Keyed, Clearance Diameter 1.74 in, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 1 5/8 in, Different Bore Sizes No, Keyway Depth 1 3/32 in, Keyway Depth 2 3/32 in, Minimum Bore Diameter Not Applicable, Keyway Width 1 3/16 in, Keyway Width 2 3/16 in, Maximum Bore Diameter Not Applicable, Maximum Speed 4,000 RPM, Maximum Torque 2,280 in-lb, Overall Length 2 1/2 in
| Item | Rigid Shaft Coupling |
|---|---|
| Shaft Locking Type - Couplings | 2 Piece Clamp |
| System of Measurement | Inch |
| Bore Dia. | 7/8 in |
| Material - Couplings | Steel |
| Outside Dia. | 1-5/8 in |
| Overall Length | 2-1/2 in |
| With Keyway / Without Keyway | With Keyway |
| Finish | Black Oxide |
| Material | Steel |
| Max. Torque | 2,280 in-lb |
| Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
| Machined From | Bar Stock |
| Keyway Width | 3/16 in |
| Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
| Type | Two Piece Clamp Type, with Keyway |
| Screw Size | 1/4"-28 |
| Keyway Width (In.) | 3/16 |
| Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
| Max. Torque (In.-Lbs.) | 2,280 |
| Screw Size (In.) | 1/4-28 x 5/8 |
| Design | Eight Vibration Resistant Socket Capscrews, Can be Installed without Disassembling any Machinery or Components |
| Maximum Bore Diameter | Not Applicable |
| Screw Thread Size | 1/4"-28 |
| Coupling Outside Diameter | 1-5/8 in |
| Coupling Material Finish | Black Oxide |
| Bore Diameter 1 | 7/8 in |
| Maximum Speed | 4,000 RPM |
| Clearance Diameter | 1.74 in |
| Different Bore Sizes | No |
| Keyway Width 1 | 3/16 in |
| Keyway Depth 1 | 3/32 in |
| Bore Diameter 2 | 7/8 in |
| Coupling Construction | Two-Piece |
| Keyway Depth 2 | 3/32 in |
| Coupling Material | Carbon Steel |
| Maximum Torque | 2,280 in-lb |
| Keyway Width 2 | 3/16 in |
| Zero Backlash | Yes |
| Bore Type | Round Keyed |
| Shaft Locking Type | Clamp On |
| Minimum Bore Diameter | Not Applicable |
| Wire Rope Length | 2-1/2 in |
| Length | 2-1/2 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |