Rotary Gear Pump Head, Body Material Cast Iron, Compatible Motor Frame Carbonator Mount, Viscosity - Maximum 100 SUS, Suction Lift - Maximum 5.1 ft, Operating Pressure - Maximum 40 psi, Operating Temperature - Maximum 375 Degrees F, Operating Temperature - Minimum 40 Degrees F, Required Horsepower 1/3 hp, Connection Size 1/2 in, Connection Type NPT, Shaft Outer Diameter 1/2 in, Flow Rate @ 100 psi Not Applicable, Seal Type Lip, Shaft Length Not Applicable, Seal Material Viton, Gear Design Spur
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Duty Rating | Intermediate |
| Design | Carbonator Mount |
| Pump Body Material | Cast Iron |
| Port Size | 1/2 in |
| Recommended Motor HP | 0.3333 HP |
| Seal Material | FKM |
| Pump RPM | 1,725 RPM |
| Gear | Spur |
| Includes | Not Applicable |
| Shaft Dia. | 1/2 in |
| Height | 3 in |
| Relief Valve | Without |
| Item | Rotary Gear Pump Head |
| Suction Lift | 5.1 ft |
| Width | 3 in |
| Max. Viscosity | 100 SUS |
| Max. Pressure | 40 psi |
| O-Ring Material | Viton |
| GPM @ 25 PSI | 3.8 gpm |
| GPM @ 20 PSI | 3.9 gpm |
| GPM @ 40 PSI | 3.4 gpm |
| Suction Lift @ 1725 RPM | 5.1 ft |
| Seal | Viton Lip |
| Length | 4.3 in |
| Shaft Material | Stainless Steel |
| Temp. Range | 40 to 375 deg F |
| GPM @ Freeflow @ 1725 RPM | 4.1 gpm |
| GPM @ Freeflow | 4.1 gpm |
| Motor Frame | Carbonator Mount |
| Body Material | Cast Iron |
| Seal Type | Lip |
| Overall Height | 3 in |
| Overall Length | 4.3 in |
| Overall Width | 3 in |
| Operating Pressure - Maximum | 40 psi |
| Flow Rate @ 125 psi | Not Applicable |
| Flow Rate @ 60 psi | Not Applicable |
| Suction Lift - Maximum | 5.1 ft |
| Operating Temperature - Maximum | 375 deg F |
| Motor Mounting Type | Not Applicable |
| Operating Temperature - Minimum | 40 deg F |
| Viscosity - Maximum | 100 SUS |
| Gear Design | Spur |
| Compatible Motor Frame | Carbonator Mount |
| Required Horsepower | 0.3333 HP |
| Connection Size | 1/2 in |
| Flow Rate @ 25 psi | 3.8 gpm |
| Flow Rate @ 75 psi | Not Applicable |
| Flow Rate @ 80 psi | Not Applicable |
| Flow Rate @ 20 psi | 3.9 gpm |
| Current | Not Applicable |
| Flow Rate @ 40 psi | 3.4 gpm |
| Flow Rate @ 100 psi | Not Applicable |
| Connection Type | NPT |
| Shaft Length | Not Applicable |
| Wetted Material | Not Applicable |
| Gear Material | Steel |
| Flow Rate @ 50 psi | Not Applicable |
| Shaft Outer Diameter | 1/2 in |
| Series | Not Applicable |
| For Motor Speed - Maximum | Not Applicable |
| Inlet Diameter | 1/2 in |
| For Motor Frame Size | Not Applicable |
| Discharge Diameter | 1/2 in |
| Chemical Compatibility | Cooking Oils |
| Drive Type | Direct Drive |
| Bearing Material | Not Applicable |
| Bushing Material | Not Applicable |
| Gear Pump Type | Not Applicable |
| Includes Relief Valve | No Relief Valve Included |
| Shaft Material Stainless Steel Grade | 304 |
| Feet of Head - Maximum | Not Applicable |
| Wire Rope Length | 4.3 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |