Rotary Gear Pump Head, Body Material Cast Iron, Compatible Motor Frame Not Applicable, Viscosity - Maximum 550 SUS, Suction Lift - Maximum 12.3 ft, Operating Pressure - Maximum 125 psi, Operating Temperature - Maximum 280 Degrees F, Operating Temperature - Minimum 32 Degrees F, Required Horsepower 1 1/2 hp, Connection Size 3/4 in, Connection Type NPT, Shaft Outer Diameter 5/8 in, Flow Rate @ 100 psi 10.2 gpm, Seal Type Mechanical, Shaft Length 2 5/8 in
| Duty Rating | Heavy |
|---|---|
| Design | Pedestal |
| Pump Body Material | Cast Iron |
| Port Size | 3/4 in |
| Recommended Motor HP | 1.5 HP |
| Seal Material | Ceramic, Carbon Stainless Steel, FKM |
| Pump RPM | 1,725 RPM |
| Gear | Steel Spur |
| HP @ Free Flow | 0.75 HP |
| O-Ring Material | Viton |
| GPM @ 125 PSI | 9.7 gpm |
| Max. Pressure | 125 psi |
| Length | 10.4 in |
| HP @ 125 PSI @ 1725 RPM | 1.5 HP |
| GPM @ Freeflow | 10.8 gpm |
| HP @ 60 PSI | Not Available |
| Height | 3-3/4 in |
| Max. Viscosity | 550 SUS |
| Width | 3-1/2 in |
| GPM @ 125 PSI @ 1725 RPM | 9.7 gpm |
| Relief Valve | With |
| HP @ Free Flow @ 1725 RPM | 0.75 HP |
| GPM @ 75 PSI | 10.5 gpm |
| Suction Lift | 12.3 ft |
| HP @ 25 PSI | 0.75 HP |
| HP @ 20 PSI | Not Available |
| Seal | Mechanical with Stainless Steel, Viton, Carbon/Ceramic |
| HP @ 100 PSI | 1.5 HP |
| HP @ 80 PSI | Not Available |
| Shaft Height | 2-5/8 in |
| Temp. Range | 32 to 280 deg F |
| GPM @ 100 PSI | 10.2 gpm |
| GPM @ 50 PSI | 10.6 gpm |
| Shaft Dia. | 5/8 in |
| GPM @ Freeflow @ 1725 RPM | 10.8 gpm |
| HP @ 50 PSI | 1 HP |
| HP @ 125 PSI | 1.5 HP |
| Item | Rotary Gear Pump Head |
| Shaft Material | Steel |
| Suction Lift @ 1725 RPM | 12.3 ft |
| HP @ 75 PSI | 1 HP |
| HP @ 40 PSI | Not Available |
| GPM @ 25 PSI | 10.7 gpm |
| Body Material | Cast Iron |
| Seal Type | Mechanical |
| Includes | Relief Valve |
| Overall Width | 3.6 in |
| Overall Height | 3.8 in |
| Overall Length | 10.4 in |
| Flow Rate @ 25 psi | 10.7 gpm |
| Required Horsepower | 1.5 HP |
| Connection Size | 3/4 in |
| Flow Rate @ 100 psi | 10.2 gpm |
| Viscosity - Maximum | 500 SUS |
| Operating Pressure - Maximum | 125 psi |
| Current | Not Applicable |
| Gear Material | Steel |
| Connection Type | NPT |
| Operating Temperature - Maximum | 280 deg F |
| Shaft Outer Diameter | 5/8 in |
| Flow Rate @ 20 psi | Not Applicable |
| Flow Rate @ 60 psi | Not Applicable |
| Flow Rate @ 80 psi | Not Applicable |
| Compatible Motor Frame | Not Applicable |
| Suction Lift - Maximum | 12.3 ft |
| Gear Design | Spur |
| Flow Rate @ 75 psi | 10.5 gpm |
| Shaft Length | 2-5/8 in |
| Flow Rate @ 125 psi | 10.7 gpm |
| Motor Mounting Type | Pedestal |
| Operating Temperature - Minimum | 32 deg F |
| Flow Rate @ 40 psi | Not Applicable |
| Flow Rate @ 50 psi | 10.6 gpm |
| Includes Relief Valve | Relief Valve Included |
| Gear Pump Type | External |
| Discharge Diameter | 3/4 in |
| For Motor Frame Size | F56HC |
| Inlet Diameter | 3/4 in |
| Series | B-Series |
| For Motor Speed - Maximum | 1,725 rpm |
| Drive Type | Magnetic Drive |
| Feet of Head - Maximum | 288 ft |
| Chemical Compatibility | Diesel, Engine Oil, Ethylene Glycol, Fuel Oil, Water |
| Wire Rope Length | 10.4 in |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |