Rotary Gear Pump Head, Body Material 316 Stainless Steel, Compatible Motor Frame 56C, Viscosity - Maximum 500 SUS, Suction Lift - Maximum 3.5 ft, Operating Pressure - Maximum 125 psi, Operating Temperature - Maximum 280 Degrees F, Operating Temperature - Minimum 32 Degrees F, Required Horsepower 1 hp, Connection Size 3/8 in, Connection Type NPT, Shaft Outer Diameter 1/2 in, Flow Rate @ 100 psi 4.4 gpm, Seal Type Mechanical, Shaft Length Not Applicable
| Item | Rotary Gear Pump Head |
|---|---|
| Port Size | 3/8 in |
| Shaft Dia. | 1/2 in |
| HP @ Free Flow | 0.5 HP |
| Duty Rating | Intermediate |
| O-Ring Material | Viton |
| GPM @ 100 PSI | 4.4 gpm |
| GPM @ 25 PSI | 4.8 gpm |
| Max. Viscosity | 550 SUS |
| Length | 11.1 in |
| HP @ 125 PSI @ 1725 RPM | 1 HP |
| Suction Lift @ 1725 RPM | 3 ft 6 in |
| HP @ 25 PSI | 0.5 HP |
| Gear | Fortron PPS Spur |
| Suction Lift | 3 ft 6 in |
| Seal | Mechanical Seal Carbon/Ceramic with Viton |
| GPM @ Freeflow @ 1725 RPM | 4.8 gpm |
| GPM @ 50 PSI | 4.7 gpm |
| HP @ 100 PSI | 1 HP |
| Temp. Range | 32 Degrees to 280 Degrees F |
| GPM @ Freeflow | 4.8 gpm |
| Max. Pressure | 125 psi |
| Width | 5-3/4 in |
| Height | 5-3/4 in |
| GPM @ 125 PSI @ 1725 RPM | 4.1 gpm |
| Relief Valve | Without |
| GPM @ 75 PSI | 4.6 gpm |
| Motor Frame | 56C |
| GPM @ 125 PSI | 4.1 gpm |
| Pump RPM | 1,725 RPM |
| Recommended Motor HP | 1 HP |
| Pump Body Material | 316 Stainless Steel |
| Design | Close Coupled |
| HP @ 50 PSI | 0.75 HP |
| HP @ Free Flow @ 1725 RPM | 0.5 HP |
| HP @ 125 PSI | 1 HP |
| HP @ 75 PSI | 0.75 HP |
| Shaft Material | Stainless Steel |
| Includes | Not Applicable |
| Gear Material | Polyphenylene Sulfide |
| Body Material | 316 Stainless Steel |
| Overall Length | 11.1 in |
| Overall Width | 5.8 in |
| Overall Height | 5.8 in |
| Shaft Outer Diameter | 1/2 in |
| Connection Size | 3/8 in |
| Operating Pressure - Maximum | 125 psi |
| Suction Lift - Maximum | 3 ft 6 in |
| Flow Rate @ 20 psi | Not Applicable |
| Flow Rate @ 125 psi | 4.8 gpm |
| Viscosity - Maximum | 500 SUS |
| Shaft Length | Not Applicable |
| Flow Rate @ 80 psi | Not Applicable |
| Flow Rate @ 75 psi | 4.6 gpm |
| Flow Rate @ 40 psi | Not Applicable |
| Connection Type | NPT |
| Required Horsepower | 1 HP |
| Current | Not Applicable |
| Operating Temperature - Maximum | 280 deg F |
| Flow Rate @ 25 psi | 4.8 gpm |
| Motor Mounting Type | Close Coupled |
| Seal Type | Mechanical |
| Flow Rate @ 100 psi | 4.4 gpm |
| Gear Design | Spur |
| Flow Rate @ 50 psi | 4.7 gpm |
| Flow Rate @ 60 psi | Not Applicable |
| Compatible Motor Frame | 56C |
| Seal Material | Ceramic, FKM, Carbon /Stainless Steel |
| Operating Temperature - Minimum | 32 deg F |
| Shaft Material Stainless Steel Grade | 316 |
| Chemical Compatibility | Methanol, Methyl Chloride, Nitric Acid 20% Solution, Paint Thinner |
| Discharge Diameter | 3/8 in |
| For Motor Speed - Maximum | 1,725 rpm |
| For Motor Frame Size | 56 C |
| Feet of Head - Maximum | 288 ft |
| Gear Pump Type | External |
| Drive Type | Direct Drive |
| Series | B-Series |
| Includes Relief Valve | No Relief Valve Included |
| Inlet Diameter | 3/8 in |
| Bushing Material | Carbon Graphite |
| Wire Rope Length | 11.1 in |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |