Sprinkler Pump, Phase Single, Pump Housing Material Thermoplastic, Horsepower 2 hp, Nameplate Voltage 115/208-230V AC, Suction Lift (Maximum) 20 ft, Flow Rate @ 10 psi 90 gpm, Flow Rate @ 20 psi 77 gpm, Maximum Feet of Head 134 ft, Shut Off Pressure (Maximum) 58 psi, Compatible Intake Pipe Size 2 in, Compatible Discharge Pipe Size 2 in, Intake Type NPT, Motor Enclosure Totally Enclosed Fan Cooled, Flow Rate @ 30 psi 61 gpm, Flow Rate @ 40 psi 44 gpm, Priming Self-Priming
| Pressure Pump Type | Centrifugal Pump |
|---|---|
| Item | Sprinkler Pump |
| Inlet | 2 in |
| HP - Pumps | 2 HP |
| Voltage - Pumps | 120V AC, 208V AC to 240V AC |
| Outlet | 2 in |
| Wetted Materials | SS,Viton,Carbon,Ceramic, Thermoplastic |
| Phase - Pumps | 1 |
| HP | 2 |
| Voltage | 115V, 208V, to 230V |
| Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
| Outlet Size - Pumps | 2 in NPT |
| Suction Lift | 25 ft |
| Inlet (In.) | 2 |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| Max. Pressure - Pumps | 58 psi |
| Best Efficiency GPM @ Head | 47 @ 70 FT. |
| Housing Material - Pumps | Thermoplastic |
| Inlet Size - Pumps | 2 in NPT |
| Port Rotation | 90 Degrees Increments |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Max. Case Pressure | 80 psi |
| Impeller Type | Closed |
| Bearing Type | Double Shielded Pre Lubricated Ball |
| Max. Pressure | 58 psi |
| Thermal Protection | Automatic Reset |
| Impeller Material | Noryl |
| Duty | Continuous |
| GPM @ 30 PSI | 47 |
| Max. Specific Gravity | 1 |
| Motor Type | Capacitor-Start, Run |
| Phase | Single |
| Stages | 1 |
| GPM @ 45 PSI | 24 |
| Frame | 56J |
| GPM @ 15 PSI | 64 |
| Height | 13-3/4 in |
| Includes | Manual |
| Max. Head | 134 ft |
| Agency Compliance | Motor Only CSA |
| Hz | 60 Hz |
| Length | 19.7 in |
| GPM @ 40 PSI | 34 |
| GPM @ 35 PSI | 40 |
| GPM @ 25 PSI | 53 |
| Features | Stainless Steel Fasteners and Inserts |
| Amps | 23.0/12.0-11.5 |
| GPM @ 20 PSI | 59 |
| Width | 11-1/4 in |
| GPM @ 10 PSI | 69 |
| Manufacturers Warranty Length | 1 yr |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| Housing Material | Thermoplastic |
| GPM @ 50 PSI | 14 |
| Inlet Pressure | 22 psi |
| Overall Width | 11.42 in |
| Overall Height | 13.87 in |
| Overall Length | 19.7 in |
| Standards | CUS |
| Shaft Material | Stainless Steel |
| Maximum Flow Rate | 69 gpm |
| Wetted Material | Ceramic, Viton, Carbon, Stainless Steel, Thermoplastic |
| Flow Rate @ 40 psi | 44 gpm |
| Best Efficiency Flow | 47 gpm |
| Case Pressure (Maximum) | 80 psi |
| Thermal Overload Protection | Yes |
| Pump Housing Material | Thermoplastic |
| Maximum Feet of Head | 134 ft |
| Suction Lift (Maximum) | 20 ft |
| Specific Gravity (Maximum) | 1 |
| Priming | Self-Priming |
| Motor Frame Designation | 56J |
| Best Efficiency Head | 70 ft |
| Flow Rate @ 15 psi | 77 gpm |
| Nameplate Voltage | 115/208-230V AC |
| Compatible with Media Type | Non-Flammable Liquids |
| Flow Rate @ 50 psi | 14 gpm |
| Compatible Intake Pipe Size | 2 in |
| Discharge Rotation | 90 Degrees Increments |
| Manufacturer Warranty Length | 1 yr |
| Intake Type | NPT |
| Discharge Type | NPT |
| Flow Rate @ 30 psi | 61 gpm |
| Flow Rate @ 10 psi | 90 gpm |
| Frequency | 60 Hz |
| Maximum RPM | 3,450 rpm |
| For Use With Potable Systems | No |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Compatible Discharge Pipe Size | 2 in |
| Flow Rate @ 20 psi | 77 gpm |
| Shut Off Pressure (Maximum) | 58 psi |
| Duty Cycle | Continuous |
| Horsepower | 2 |
| Media Temperature - Minimum | 40 deg F |
| Inlet Diameter | 2 in |
| Number of Stages | 1 |
| Feet of Head (Minimum) | Not Applicable |
| Ambient Temperature - Maximum | 104 deg F |
| Pumping Application | Irrigation, Sprinkler Systems, Spraying Systems |
| Feet of Head (Maximum) | 134 ft |
| Series | Not Applicable |
| Full Load Current | 23.0/12.0-11.5A |
| Pump Drive Configuration | Frame-Mounted |
| Chemical Compatibility | Non-Flammable Liquids |
| Motor Frame Size | 56J |
| Media Temperature - Maximum | 180 deg F |
| Electrical Connection Type | Hardwired |
| Ambient Temperature - Minimum | 40 deg F |
| Case Pressure - Maximum | 80 psi |
| Shut Off Pressure - Maximum | 58 psi |
| Flow Rate (Maximum) | 69 gpm |
| Discharge Diameter | 2 in |
| Shaft Seal Material | Ceramic, FKM, Carbon Stainless Steel |
| Flow Rate (Minimum) | Not Applicable |
| Pump Design | End Suction |
| Solid Diameter (Maximum) | Not Applicable |
| Motor Design | Capacitor-Start, Run |
| Wire Rope Length | 19.7 in |
| Fits Chest Size | Stainless Steel Fasteners and Inserts |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |