Sprinkler Pump, Phase Three, Pump Housing Material Thermoplastic, Horsepower 2 hp, Nameplate Voltage 230/460V AC, Suction Lift (Maximum) 20 ft, Flow Rate @ 10 psi 90 gpm, Flow Rate @ 20 psi 77 gpm, Maximum Feet of Head 134 ft, Shut Off Pressure (Maximum) 58 psi, Compatible Intake Pipe Size 2 in, Compatible Discharge Pipe Size 2 in, Intake Type NPT, Motor Enclosure Totally Enclosed Fan Cooled, Flow Rate @ 30 psi 61 gpm, Flow Rate @ 40 psi 44 gpm, Priming Self-Priming, Best Efficiency Flow 47 gpm
| Promotion Restriction | Not eligible for promotion |
|---|---|
| Item | Sprinkler Pump |
| Pressure Pump Type | Centrifugal Pump |
| HP - Pumps | 2 HP |
| Inlet | 2 in |
| Voltage - Pumps | 208V AC to 240V AC, 480V AC |
| Outlet | 2 in |
| Phase - Pumps | 3 |
| HP | 2 |
| Wetted Materials | SS,Viton,Carbon,Ceramic, Thermoplastic |
| Voltage | 460V, 208V to 230V |
| Outlet Size - Pumps | 2 in NPT |
| Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
| Inlet (In.) | 2 |
| Suction Lift | 25 ft |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| Max. Pressure - Pumps | 58 psi |
| Housing Material - Pumps | Thermoplastic |
| Best Efficiency GPM @ Head | 47 @ 70 FT. |
| Inlet Size - Pumps | 2 in NPT |
| GPM @ 40 PSI | 34 |
| Includes | Manual |
| Amps | 9.0-8.8/4.4 |
| Phase | Three |
| Motor Type | 3-Phase |
| Port Rotation | 90 Degrees Increments |
| Hz | 60 Hz |
| Impeller Material | Noryl |
| GPM @ 10 PSI | 69 |
| GPM @ 50 PSI | 14 |
| Length | 19.6 in |
| GPM @ 25 PSI | 53 |
| Impeller Type | Closed |
| Width | 11-1/4 in |
| GPM @ 45 PSI | 24 |
| Bearing Type | Double Shielded Pre Lubricated Ball |
| GPM @ 20 PSI | 59 |
| Max. Pressure | 58 psi |
| For Use With | Nonflammable Liquids Compatible with Pump Component Materials |
| GPM @ 15 PSI | 64 |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Duty | Continuous |
| Max. Specific Gravity | 1 |
| Housing Material | Thermoplastic |
| GPM @ 35 PSI | 40 |
| Height | 13-3/4 in |
| Agency Compliance | Motor Only CSA |
| Max. Head | 134 ft |
| Features | Stainless Steel Fasteners and Inserts |
| Frame | 56J |
| Max. Case Pressure | 138 psi |
| Manufacturers Warranty Length | 1 yr |
| GPM @ 30 PSI | 47 |
| Stages | 1 |
| Inlet Pressure | 22 psi |
| Overall Length | 19.6 in |
| Overall Width | 11.42 in |
| Standards | CUS |
| Overall Height | 13.87 in |
| Shaft Material | Stainless Steel |
| For Use With Potable Systems | No |
| Thermal Overload Protection | No |
| Shut Off Pressure (Maximum) | 58 psi |
| Maximum Flow Rate | 69 gpm |
| Flow Rate @ 50 psi | 14 gpm |
| Nameplate Voltage | 230/460V AC |
| Flow Rate @ 10 psi | 90 gpm |
| Duty Cycle | Continuous |
| Motor Frame Designation | 56J |
| Best Efficiency Flow | 47 gpm |
| Horsepower | 2 |
| Specific Gravity (Maximum) | 1 |
| Priming | Self-Priming |
| Flow Rate @ 20 psi | 77 gpm |
| Discharge Rotation | 90 Degrees Increments |
| Compatible with Media Type | Non-Flammable Liquids |
| Manufacturer Warranty Length | 1 yr |
| Discharge Type | NPT |
| Wetted Material | Ceramic, Viton, Carbon, Stainless Steel, Thermoplastic |
| Maximum Feet of Head | 134 ft |
| Flow Rate @ 15 psi | 77 gpm |
| Compatible Intake Pipe Size | 2 in |
| Suction Lift (Maximum) | 20 ft |
| Frequency | 60 Hz |
| Intake Type | NPT |
| Flow Rate @ 40 psi | 44 gpm |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Case Pressure (Maximum) | 138 psi |
| Maximum RPM | 3,450 rpm |
| Flow Rate @ 30 psi | 61 gpm |
| Compatible Discharge Pipe Size | 2 in |
| Best Efficiency Head | 70 ft |
| Pump Housing Material | Thermoplastic |
| Case Pressure - Maximum | 138 psi |
| Pump Drive Configuration | Frame-Mounted |
| Shaft Seal Material | Ceramic, FKM, Carbon Stainless Steel |
| Number of Stages | 1 |
| Electrical Connection Type | Hardwired |
| Shut Off Pressure - Maximum | 58 psi |
| Media Temperature - Minimum | 40 deg F |
| Flow Rate (Maximum) | 69 gpm |
| Feet of Head (Minimum) | Not Applicable |
| Motor Design | Three-Phase |
| Ambient Temperature - Minimum | 40 deg F |
| Chemical Compatibility | Non-Flammable Liquids |
| Feet of Head (Maximum) | 134 ft |
| Ambient Temperature - Maximum | 104 deg F |
| Pumping Application | Irrigation, Sprinkler Systems, Spraying Systems |
| Full Load Current | 5.6/2.8A |
| Inlet Diameter | 2 in |
| Motor Frame Size | 56J |
| Series | Not Applicable |
| Discharge Diameter | 2 in |
| Pump Design | End Suction |
| Media Temperature - Maximum | 180 deg F |
| Solid Diameter (Maximum) | Not Applicable |
| Flow Rate (Minimum) | Not Applicable |
| Wire Rope Length | 19.6 in |
| Fits Chest Size | Stainless Steel Fasteners and Inserts |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |